Kn0x47's interior work

[kn0x47]

Figured I'd start a thread for posting interior work as i get it finished.

PROJECTS
-Click for 03 Accord coupe rear seat swap
-Click for 03 Acura CL manual console swap



ScanGauge II
A few weeks ago I bought a scan gauge and decided I wanted it flush mounted in my dash.

Took out my radio trim kit that's been blocked off sense my radio sits down lower
DSC_1270 by Jonathan Boothe, on Flickr

Disassembled the over price device
DSC_1271 by Jonathan Boothe, on Flickr

unfortunately for me, they tried to make it look fancy so i had this curve to deal with
DSC_1274 by Jonathan Boothe, on Flickr

and these edges had to be cut off
DSC_1275 by Jonathan Boothe, on Flickr

results
DSC_1276 by Jonathan Boothe, on Flickr

i smoothed this section even more than pictured
DSC_1278 by Jonathan Boothe, on Flickr

after cutting a whole in the radio trim thing i put the scan gauge in and screwed it back together
DSC_1283 by Jonathan Boothe, on Flickr

RESULTS
DSC_1285 by Jonathan Boothe, on Flickr

i adjusted the color of the screen to match my stereo
DSC_1288 by Jonathan Boothe, on Flickr

 

[kn0x47]

eventually i'm getting rid of the fabric wrap and going to a shinny finish and then i'll mold the edge of the scangauge onto it's mounting surface

 

[f20bcg3]

If u ever get rid of fabric wrap id be interested in buying the fabric wrapped bezel

F20Bs don't take prisoners they chop faces off!!

 

[chaby_91]

very nicely done. looks clean

 

[Brad2274]

i have a plain black radio/console piece if you want a spare also got the woodgrain one but it sounds like you're not going that route

 

[kn0x47]

If u ever get rid of fabric wrap id be interested in buying the fabric wrapped bezel

F20Bs don't take prisoners they chop faces off!!

the fabric is in rough shape. the top half of it is actually lightly spray painted cause it faded so much

very nicely done. looks clean

thanks man

i have a plain black radio/console piece if you want a spare also got the woodgrain one but it sounds like you're not going that route

thanks but i already have a woodgrain one to work with

 

[f20bcg3]

Would u happen to be for hire to make this for me if so pm me and we can talk turkey

F20Bs don't take prisoners they chop faces off!!

 

[kn0x47]

03 Accord coupe rear seat swap​

I was at the junk yard a few days ago and i found some black leathers seats from an 03 coupe. I know an OG has done this before so I figured why not.

If you do this, remember to grab the outer brackets for the back section cause they're different.
OEM bracket on left, 03 accord on right
03 rear seat swap by Jonathan Boothe, on Flickr
03 rear seat swap by Jonathan Boothe, on Flickr

the outer mount of the rear seat doesnt use a bolt on bracket, just has this
03 rear seat swap by Jonathan Boothe, on Flickr

here's a quick install. I'm doing some work on the side panels then I'll put everything in
03 rear seat swap by Jonathan Boothe, on Flickr

CONTINUE TO NEXT POST​

 

[whitederic]

I'm interested in your radio being mounted lower. Can I get some insight?

Sent from my SM-N920V using Tapatalk

 

[kn0x47]

I'm interested in your radio being mounted lower. Can I get some insight?

Sent from my SM-N920V using Tapatalk

My car came with an OEM option third din tape deck so I used the mounting brackets and trim piece from that