FS: Left Over Parts

[simon_y]

1) AEM Fuel Rail for USDM H22
- Brand new in box, only opened to test it, never used.
- Does NOT fit Euro R intake manifolds. It only fits USDM H22 Intake manifolds and F22s.
- Includes everything
- Sold

2) T25/28 to 3in V band adaptor
- Brand new, never used.
- Bought it off a member here to use with my Greddy kit, But ditched that because the kit wouldn't make my power goal. Depending on which kit you have you might have to relocate your alternator.
- Inlcudes flange.
- $40

3) F23 Innovative Poly Mounts
- Includes Tranny mount, Drivers side mount, and rear mount
- For USDM F23's or JDM H22's. Will NOT fit USDM H22's unless you switch your F23 Drivers side block mount over to your USDM H22.
- 75A (Track) Black
- $200

4) Tein Coilover Springs (1 Set, F/R)
- Brand New in box, never used.
- Selling because it's to soft for my set up
- 65mm Inner Diameter
- 200mm Uncompressed Length
- 18K Front and 16K Rear
- Special ordered from Japan
- $160

5) Top Fuel Intake
- Fits 6th Gen H22's and CL1 Euro R's. Can probably fit Preludes and F23s and F22's also.
- Painted flat black
- Includes Coupler, Filter, and Clamps
- 3in Diameter
- Carbon Fiber Chamber
- Uber rare and mad tyte JDM!!!!
-$120

6) Generic Cold Air Intake
- Metallic Blue in colour
- 2 Piece Piping, Includes filter but could use a new one.
- 3in Diameter tubing
- Includes Clamps and Couplers
-$60

7) 98-02 Accord Sedan OE Replica Spoiler
- This is the OE replica spoiler, not the optional spoiler
- Painted SSM NH623M
- All LEDs are working, wiring not frayed
- No scrtaches.
- $60

8) 98-02 Accord Sedan Heavy Duty Trunk Springs
- Includes only one HD trunk spring and one regular spring. The reason being is because with two springs, it swung my trunk up so fast it flexed so much and touched my rear windshield. Therefore I reduced it be only installing one spring which pops it open a couple inches.
- Only really necessary if you have a spoiler which weighs the trunk down.
- $40

9) H22 Euro R Cams
- Great condition
- Came out of my running H22a Euro R PDE Head.
- Ran for Approximately 100 000 KMs
-$200

10) H22a Euro R Pistons and Rods
- Came out of my Euro R Block, Had no problems with it.
- 11.0:1 Compression Ratio
- Ran for Approximately 100 000 KMs
- $120

Located up North

Some of the smaller stuff can be shipped via Canada Post/ USPS. PM me and I'll try to get a quote for you. Only serious people PM, I don't have time to quote 100 different people for ****s and giggles.

For WSII and JDM H22 header, http://www.6thgenaccord.com/forums/showthread.php?t=42034

 

[Chris Vu]

I want those mounts. any idea if you can get the last one separately?

 

[FunnyVictor86]

I want those mounts. any idea if you can get the last one separately?

You should give them a call, they're located here in So.Cal.

1366 North Hundley Street, Anaheim, CA
(714) 524-5246 ‎

Anyway, hey Simon if that fuel rail doesn't fit our manifolds....what does? I know our manifolds have basically the same design as a type-r b-series manifold.

 

[AllGOnoSHOW]

GLWS man

 

[simon_y]

You should give them a call, they're located here in So.Cal.

1366 North Hundley Street, Anaheim, CA
(714) 524-5246 ‎

Anyway, hey Simon if that fuel rail doesn't fit our manifolds....what does? I know our manifolds have basically the same design as a type-r b-series manifold.

It can fit, some people sell adapter plates that convert our Euro R 2 stud to a 3 stud. That way you can mount the AEM fuel rail which is 3 stud onto our 2 stud Intake manifold.

Or you can just buy this one http://www.roskoracing.com/Euro_R_Billet_Rail.html

Our Intake manifold is very specific, fuel rail is different, injectors are different, and supposedly the angle the injector sits is different.

 

[simon_y]

Fuel Rail Sold!

 

[simon_y]

Got the 3rd Innovative mount. This is the complete set.