bairdandrew77
Well-Known Member
I know a lot of these aren't exactly for an Accord, but maybe you can still find what you need here. OBO on everything. I have paypal; shipping in US only. Larger items pickup only. Please allow a few days for shipment, my schedule is usually busy so I'm not always able to ship it immediately. Price does not include shipping unless otherwise noted.
Best way to contact me is by texting 435-249-1880.
Also willing to trade for OEM/aftermarket CRX parts.
Located in Ogden Utah!
- H22 no name header. Dirty and some surface rust that could be cleaned up. No downpipe. It fits, works and it's cheap. $15
- H22A4 head. Could use a valve job and keepers need to be re-installed on one valve but overall in great condition. Perfect for an F23/H22 hybrid. Includes cams, caps and valve cover. Selling cheap, $150
- Felpro head gasket for B series VTEC engines. BNIB! Spend around $50-$55 for this a few months ago, decided to go with OEM, can't return this now. Fits all B16 and B18C1 motors. I'd assume it'll work with B17 and LS/VTEC conversions but can't make any promises there. $35
- JDM H22A from 96 Prelude. Estimated 60k-90k miles. Smoked on cold starts and during vtec. Cold leak down test showed low compression in cylinder 3, suspecting worn rings. $400 Pick up only!
- M2A4 transmission from a 1995 JDM Prelude. Works good. Works with all H and most F series engines. Use it with your 90's Accord for a quick performance upgrade. $300 Pick up only!
- Universal blue tip can muffler. Nice with a few scratches on the bottom. Fairly big but not too big. No rust that I can find anywhere. Can't find any brand anywhere, so I'm not sure if it's a no-name or brand name. Will post diameter measurements whenever I find my measuring tape. $15 Pick up only for now.
- D series valve cover NON-VTEC. Will fit any D15/D16/ZC non-VTEC head as long as the spark plug holes are in the back. Some paint is peeling as seen in the picture. $25
- PM5 OBD0 ecu from 89 CRX DX manual transmission D15b2, will work in any 88-91 Civic with DPFI $20
- D15 DPFI complete intake manifold. Came off an 89 CRX DX, but is the same for any 88-91 D series with DPFI. Will not sell any parts or sensors separately. $50
- OEM 88-89 CRX tail light set. Will fit 90/91 models. Has cracks in various places but is overall in decent condition. Will not sell parts separately. $70
- 88-91 CRX clear tail lights in good condition. Came on the car I bought and I'm not a fan of them. Apparently these specific ones go for around $200 on ebay and Summit Racing "matrix red eye taillights euro clear/red inserts". $70
- 88/89 CRX rear center garnish. Has a couple minor scratches, no cracks, but one of the previous owners put some kind of black paint on it so it'll need some cleaning unless you like it. $25
- 88/89 CRX passenger taillight. Previous owner tried to tint it black but most of it wore off. Could use some cleaning. $20
- Samco Sport hoses blue for 92-96 Prelude. Never used, don't know if it'll fit other cars. $75
- Duralast spark plug wires from h22, less than 5k miles used! $15
- Lower section of intake manifold for H22a1 (top half was used on my old car) includes EGR and IAT sensor; EGR ports cleaned by previous owner, hasn't been reused since. $40
- Middle section for H series intake manifolds (can't remember the name) with butterfly valves. $25
- 3 pin IAC valve- almost new autozone part off an f23a1, might fit others. Works perfectly. $50
- OEM EGR valve off f23a1 $25
- Fuel rail from F23a1 engine, 98-02 Accord. Might fit other Accord motors, not too sure. $10
- OEM throttle body for f23a1 98-02 Accord. Will fit other motors. $15
Misc non-Honda parts:
- OEM stereo deck from 2nd gen Ford Escort (91-96). $15
- OEM stereo deck for Chrysler products. Fits a wide variety of Chrysler (Dodge, Jeep, etc.) vehicles from the 80s to 90s. $10
SOLD ITEMS
- AEM intake tube for 5th gen Prelude (97-01). $OLD
- D16Y8 VTEC solenoid. Good condition, no broken connectors, comes with gasket. $OLD
- PM9 OBD0 ecu DPFI $OLD
- 88-91 CRX aftermarket front & rear bumpers. $OLD
- 90/91 CRX driver side taillight. $OLD
- Front mud flaps from 89 CRX. $OLD
- D15B7 motor compression tested good. $OLD
- D15B2/D16Z6 minime engine. $OLD
- L3 transmission from 1989 CRX DX. $OLD
- Intake upper plenum from JDM H23A VTEC. Includes original 3 pin IACV. $OLD
- h22a1 engine from 1993 prelude, high miles. $OLD
- H22A4 shortblock. $OLD
- F23A1 engine longblock. $OLD
- PAA OBD2B ecu for 98-02 6th gen Accord manual transmission F23a1 $OLD
- 37820-PCF-902 OBD2 auto ecu for jdm h23a vtec $OLD
- Skunk2 alpha series dual core radiator for Integra part #349-05-1000. Never installed, but has minor wear after sitting around for too long. $OLD
- Skunk2 alpha series 66mm throttle body part #309-05-1030. Test fitted, but never fully installed. Includes throttle body, bolts and gasket. $OLD
- 1990 CRX SI engine harness $OLD
- NWC V8 T5 trans from '85 Camaro. $OLD
- Super T10 from 82 Z28. $OLD
Best way to contact me is by texting 435-249-1880.
Also willing to trade for OEM/aftermarket CRX parts.
Located in Ogden Utah!
- H22 no name header. Dirty and some surface rust that could be cleaned up. No downpipe. It fits, works and it's cheap. $15
- H22A4 head. Could use a valve job and keepers need to be re-installed on one valve but overall in great condition. Perfect for an F23/H22 hybrid. Includes cams, caps and valve cover. Selling cheap, $150
- Felpro head gasket for B series VTEC engines. BNIB! Spend around $50-$55 for this a few months ago, decided to go with OEM, can't return this now. Fits all B16 and B18C1 motors. I'd assume it'll work with B17 and LS/VTEC conversions but can't make any promises there. $35
- JDM H22A from 96 Prelude. Estimated 60k-90k miles. Smoked on cold starts and during vtec. Cold leak down test showed low compression in cylinder 3, suspecting worn rings. $400 Pick up only!
- M2A4 transmission from a 1995 JDM Prelude. Works good. Works with all H and most F series engines. Use it with your 90's Accord for a quick performance upgrade. $300 Pick up only!
- Universal blue tip can muffler. Nice with a few scratches on the bottom. Fairly big but not too big. No rust that I can find anywhere. Can't find any brand anywhere, so I'm not sure if it's a no-name or brand name. Will post diameter measurements whenever I find my measuring tape. $15 Pick up only for now.
- D series valve cover NON-VTEC. Will fit any D15/D16/ZC non-VTEC head as long as the spark plug holes are in the back. Some paint is peeling as seen in the picture. $25
- PM5 OBD0 ecu from 89 CRX DX manual transmission D15b2, will work in any 88-91 Civic with DPFI $20
- D15 DPFI complete intake manifold. Came off an 89 CRX DX, but is the same for any 88-91 D series with DPFI. Will not sell any parts or sensors separately. $50
- OEM 88-89 CRX tail light set. Will fit 90/91 models. Has cracks in various places but is overall in decent condition. Will not sell parts separately. $70
- 88-91 CRX clear tail lights in good condition. Came on the car I bought and I'm not a fan of them. Apparently these specific ones go for around $200 on ebay and Summit Racing "matrix red eye taillights euro clear/red inserts". $70
- 88/89 CRX rear center garnish. Has a couple minor scratches, no cracks, but one of the previous owners put some kind of black paint on it so it'll need some cleaning unless you like it. $25
- 88/89 CRX passenger taillight. Previous owner tried to tint it black but most of it wore off. Could use some cleaning. $20
- Samco Sport hoses blue for 92-96 Prelude. Never used, don't know if it'll fit other cars. $75
- Duralast spark plug wires from h22, less than 5k miles used! $15
- Lower section of intake manifold for H22a1 (top half was used on my old car) includes EGR and IAT sensor; EGR ports cleaned by previous owner, hasn't been reused since. $40
- Middle section for H series intake manifolds (can't remember the name) with butterfly valves. $25
- 3 pin IAC valve- almost new autozone part off an f23a1, might fit others. Works perfectly. $50
- OEM EGR valve off f23a1 $25
- Fuel rail from F23a1 engine, 98-02 Accord. Might fit other Accord motors, not too sure. $10
- OEM throttle body for f23a1 98-02 Accord. Will fit other motors. $15
Misc non-Honda parts:
- OEM stereo deck from 2nd gen Ford Escort (91-96). $15
- OEM stereo deck for Chrysler products. Fits a wide variety of Chrysler (Dodge, Jeep, etc.) vehicles from the 80s to 90s. $10
SOLD ITEMS
- AEM intake tube for 5th gen Prelude (97-01). $OLD
- D16Y8 VTEC solenoid. Good condition, no broken connectors, comes with gasket. $OLD
- PM9 OBD0 ecu DPFI $OLD
- 88-91 CRX aftermarket front & rear bumpers. $OLD
- 90/91 CRX driver side taillight. $OLD
- Front mud flaps from 89 CRX. $OLD
- D15B7 motor compression tested good. $OLD
- D15B2/D16Z6 minime engine. $OLD
- L3 transmission from 1989 CRX DX. $OLD
- Intake upper plenum from JDM H23A VTEC. Includes original 3 pin IACV. $OLD
- h22a1 engine from 1993 prelude, high miles. $OLD
- H22A4 shortblock. $OLD
- F23A1 engine longblock. $OLD
- PAA OBD2B ecu for 98-02 6th gen Accord manual transmission F23a1 $OLD
- 37820-PCF-902 OBD2 auto ecu for jdm h23a vtec $OLD
- Skunk2 alpha series dual core radiator for Integra part #349-05-1000. Never installed, but has minor wear after sitting around for too long. $OLD
- Skunk2 alpha series 66mm throttle body part #309-05-1030. Test fitted, but never fully installed. Includes throttle body, bolts and gasket. $OLD
- 1990 CRX SI engine harness $OLD
- NWC V8 T5 trans from '85 Camaro. $OLD
- Super T10 from 82 Z28. $OLD
Last edited:
