My 98 Accord Coupe V6 (Black Currant Pearl )

[98V6Accord]

CL Type S seats...passenger wired for power. Never got around to hook up the heated part.

AEM V2 CAI
Helix TBS
DC Sports Headers
Unorthodox Lightweight Pulleys
2.5 inch pipe after cat...2 resonators to 2 super 40 flowmasters
(had straight pipe to mufflers. ..no low end torque! Added 2 resonators for torque)


AEM Fuel Ignition Controller...

Dyno

188 hp
175 tq



Doing a J35Block/32heads/37IM + 6spd conversion... Will post when completed!


http://www.6thgenaccord.com/forums/showthread.php?p=872354#post872354

My dyno thread

 

[mx5kev]

Nice car, but what the use of the PSP on the dash??

 

[98V6Accord]

Nice car, but what the use of the PSP on the dash??

Thanks

Small piece of plastic... two screws on bottom of console to hold it. Works great.

 

[Igor]

Nice upgrades, only I would think it'll show better numbers on dyno....

 

[kn0x47]

nice seats

 

[puzzlemaster94]

Nice upgrades, only I would think it'll show better numbers on dyno....

Auto tranny kills the power from the V6, from what I've heard/read.


But OP, I love the purple paint on black interior. Especially with CL-Seats

 

[Igor]

^supposed to be 200hp/195lbs torque stock j30a1

 

[puzzlemaster94]

^supposed to be 200hp/195lbs torque stock j30a1

Doesn't mean your putting that much down at the wheels though

 

[Styx2015]

How did you wire in your CL-S seats? Does the power function and heat work on both?

 

[98V6Accord]

200 hp 195 tq AT Flywheel

Put all of those bolt ons on and the first run was 155hp and 140tq at wheels

Used the aem fuel ignition controller to tune it and got 185hp and 175tq at wheels

How did you wire in your CL-S seats? Does the power function and heat work on both?

Wired both of them to an empty constant 12volt on passenger side fuse panel.

Never finished the hookup...all electric works...both seats.

No heat hookup...wires still under seat.