New Wheels

[1radaccord]

I was looking at these wheels http://cgi.ebay.com/ws/eBayISAPI.dl...akeTrack=true&ssPageName=VIP:watchlink:top:en And was wonder if you guys could tell me how much poke i would get? Or how i could measure?

 

[RedRyder]

None.

How low are you? I have 18x8 +45 and the fronts are near perfectly flush with 24.25" from ground to fender (roughly 1.5 fingergap). Rears I spaced out with a 5mm, but a 10mm or 15mm would have made them flush. I just didn't want to change studs.

EDIT: see fronts below in sig pic.

 

[1radaccord]

Im 24.5 all around

 

[RedRyder]

So close to what I am, with 3mm more poke, which isn't even 1/8". So no poke.

 

[1radaccord]

Alright cool i wanted some dish but i didnt want poke

 

[RedRyder]

You do realize your 18x8 +42's won't look like the photo in the listing, right? There will be considerably less "lip" depth.

 

[SykVSyx]

Alright cool i wanted some dish but i didnt want poke

You know, if someone who knew nothing about cars read some of these posts, they would be like......

 

[1radaccord]

Yeah i figued that the lips would be way smaller ha

 

[RedRyder]

^Ok I figured you knew, but just was making sure lol.

You know, if someone who knew nothing about cars read some of these posts, they would be like......

haha I just back through the posts again, you're right.

 

[xKevo]

None.

How low are you? I have 18x8 +45 and the fronts are near perfectly flush with 24.25" from ground to fender (roughly 1.5 fingergap). Rears I spaced out with a 5mm, but a 10mm or 15mm would have made them flush. I just didn't want to change studs.

EDIT: see fronts below in sig pic.

what's your fender to ground measurement for your rear?