sway
Active Member
I had. A check. Engin . Ligjt that kept blinking the checked out the codes it came out to be cylinder position sensor i changed out the distributor and cap car still runs like crap can anyone. Help
Thank you very much for trying me out but I don't think that is the problem i just replaced my ignition coil when replacing my distributorTroubleshooting a DTC P1381 (CYP sensor
intermittent interruption) in a ’98–02 Accord L4 or
’96–00 Civic? If you can’t find anything wrong
after following the procedure in the appropriate
S/M, then remove the distributor cap, and make
sure the coil shield is in place and it’s correctly
installed as shown. If the coil shield installation
looks OK, then the ignition coil is the probably
faulty and should be replaced.
Working at a dealer has its benefits