TheEdge
Well-Known Member
Re: Projekt G23
original harness, torn down.
original harness, torn down.
What kind of head gasket are you running, im currently building a g23 and was going to use a h22 head gasket but after looking at it, i think its going to leak oil everywhere so now im leaning toward an f23 head gasket.
I will be honest. Currently I have put my G23 build on hold. The water pump gear was a pain in the *** and I could not find a press on gear.
Yes I believe I used a h22 gasket, honda oem, using prelude 2001 parts from the online honda store. I can confirm after looking at the receipts but would need some time. For the 2 oil drain holes that I thought might cause future problems I used a silicone tube that fits a caulking gun and injected silicone all the way to the camshafts in both of those cavities.
Nice catch. I will have to remove the head and see it again.
Are those arp cylinder head studs for h22? Do you have one that sits lower than the rest? I believe its the one on the top middle row looking from exhaust side.
All the G23 articles I read told me about a press on water pump gear so I bought 3 h22 water pumps from different manufacturers and came to the same conclusion regarding getting it done at the machine shop.