Replacing FF coils with stiffer springs??

[CleanWhiteHonda]

Has anyone ever taken the springs out of their Function&Form Type1s and replaced them with stiffer springs? I've been pondering...

if so what springs would you swap in, where to buy, approximate cost?

 

[20-CG5-01]

There's a DIY, not for the type 1's but for the type 2's yes.

People like swift springs, you can also ask sleeper cell about his springs on his AMR coils.

http://www.6thgenaccord.com/forums/showthread.php?t=40341&highlight=spring+type+swift

 

[LowerMyCG5]

you can do it but the struts wouldnt last long on the type ones

 

[Darianjr1]

not recommended for the type 1s too much work needed to do that just upgrade to the 2.5s or the 2s

 

[Steadycrusin401]

If you wanted to upgrade the FF 2.5 have Eibach springs. Type 1 are internally dampered so changing the spring rate would create a lot more wear/tear on the piston.