So I Just Got Back From The Dealership...

sarmientor

Active Member
Joined
Jun 3, 2012
Posts
40
Reaction score
0
Location
Tampa, FL
they did a multi-point inspection and this is what they quoted me on...

HondaQuote0001.jpg


HondaQuote0002.jpg


HondaQuote0003.jpg


HondaQuote0004.jpg


:henry: yea i rofl'd too lol well i know i definitely dont need an oil change seeing as how i changed it about two weeks ago lol
 

sarmientor

Active Member
Joined
Jun 3, 2012
Posts
40
Reaction score
0
Location
Tampa, FL
If you have a jack/stands and hand tools you can do this for 200 bucks.

the axle seal is the one that worries me the most cuz im seeing atf on the bottom of the atf pan is replacing the seal too complicated of a job they have it listed as 1.5 hours of labor time
 

fastflyinaccord

Well-Known Member
Joined
Jul 12, 2008
Posts
4,573
Reaction score
15
Location
Your "Whispering Eye"
Take it to a local shop that isn't going to rape you. You'll still have to pay but I can bet it will be a lot cheaper than taking it to a dealership.
 

LeBirdNest

Titleist
Joined
Oct 18, 2010
Posts
3,095
Reaction score
15
Location
Dallas
You're not manual so when you pop the axle out to replace the seal, you won't have to do a drain and fill. All you need to do is take off the hub, brakes and axle and then replace that seal.
 

kn0x47

Senior Member
Joined
Mar 14, 2008
Posts
3,739
Reaction score
23
Location
Birmingham, AL
replacing an axle seal just requires pulling the axle out. it doesn't take 1.5 hrs to do. an experienced mechanic should be able to do that job in 30 mins or so
 

sarmientor

Active Member
Joined
Jun 3, 2012
Posts
40
Reaction score
0
Location
Tampa, FL
on the notes it says the oil pan might be leaking they quoted me on hondabond is it better to get a felpro gasket or use hondabond?
 

Latest posts

Back
Top