phi1542
Well-Known Member
Im trying to flush my stock wheels too. I have the oem v6 wheels and lowered on h&r race springs(2.2"F 1.75"R) not sure what size spacers to put and would I need to put new studs? 5x114.3 bolt pattern tire size 205/60/16
Stock V6 EX wheels at 16x6.5 +55 are going to take some pretty wide spacers to be flush. Can't say I recommend that but fyi any spacer over 5mm needs extended studs.
Stock V6 EX wheels at 16x6.5 +55 are going to take some pretty wide spacers to be flush. Can't say I recommend that but fyi any spacer over 5mm needs extended studs.
Is this true even when running hub centric spacers?
Another question that I had was which size hub centric spacer would clear the factory wheel studs in order for the wheel to sit flush on the spacer without the stud poking out?
Stock V6 EX wheels at 16x6.5 +55 are going to take some pretty wide spacers to be flush. Can't say I recommend that but fyi any spacer over 5mm needs extended studs.
hubcentric with the built in stud would work but not on stock wheels. the new studs go with the wheels but your old studs are suppose to stick in other holes in some after market wheels but stockies dont have the extra holes.