truWarier02
Well-Known Member
Thanks for all the suggestions.
Last edited:
strut tower bolts!
- Thread starter truWarier02
- Start date
CG6Lemon
Detailing Enthusiast
Re: *advice needed* strut tower bolts!
breaker bar is ur freind.
breaker bar is ur freind.
BlkCurrantKord
Super Moderator
Re: *advice needed* strut tower bolts!
Get a breaker bar or something to put over the end of the ratchet.
Leverage FTW.
Get a breaker bar or something to put over the end of the ratchet.
Leverage FTW.
truWarier02
Well-Known Member
Re: *advice needed* strut tower bolts!
tried most of them.. mostly the ones that are from the struts.. not the oem bar.
tried most of them.. mostly the ones that are from the struts.. not the oem bar.
truWarier02
Well-Known Member
Re: *advice needed* strut tower bolts!
i'm supposed to turn it counter-clockwise too right?
i'm supposed to turn it counter-clockwise too right?
kurtage77
Well-Known Member
Re: *advice needed* strut tower bolts!
use some PB blaster
worked wonders for getting my struts out
use some PB blaster
worked wonders for getting my struts out
truWarier02
Well-Known Member
Re: *advice needed* strut tower bolts!
hmm, i should go and get a can of pb blaster right now then.
so it'll eliminate the tension or rust from the bolts/screws immediately?
hmm, i should go and get a can of pb blaster right now then.
so it'll eliminate the tension or rust from the bolts/screws immediately?
Re: *advice needed* strut tower bolts!
hmm, dont just spray and work. spray and let it sit there for a while to sink in there. i got megan too.
and those bolts were also tight. what i did was put the part that goes on the suspension and put the screws in then tried loosening there and it worked for me. never push, pull.
hmm, dont just spray and work. spray and let it sit there for a while to sink in there. i got megan too.
and those bolts were also tight. what i did was put the part that goes on the suspension and put the screws in then tried loosening there and it worked for me. never push, pull.
