Sway Bar Size FAQ

[NotNice]

Thw front under the car? Not the top? I think there the same size so it wouldnt make a difference. Do u no?

 

[RedRyder]

The sway bars are under the car, one at front, one at rear. Strut bars are on the top of shock towers.

The elbow strut bars from the 2G TL fit the 6GA.

 

[NotNice]

Yea. Sorry i meant same size in tl sway bar and the one we have now.

 

[NotNice]

comparing stock 6thgen RSB to TL-S MT RSB

 

[RedRyder]

^If your coupe is a V6, your stock was 17mm. You'll notice a huge difference with the 07-08 TL-S 6MT bar, which is 21mm.

 

[001Stunna]

You'll notice a huge difference with the 07-08 TL-S 6MT bar, which is 21mm.

One from a 2004 and 2008 TL, as long as you're going for a 6MT should be/is the same part and size...doesnt have to be a TL-S.

2008 Acura TL (4DR TYPE-S - KA6MT)
52300-SEP-A11 SPRING, RR. STABILIZER

2004 Acura TL (4DR SPORT (NAVI/SUMMERTIRE) - KA6MT)
52300-SEP-A11 SPRING, RR. STABILIZER

 

[NotNice]

yuppp. i feel the difference all right.. taking corners like never before while still being safe about it.

 

[Mikey]

Everything listed in the OP fits our 98-02, correct?

 

[F350spyder]

the TL swap bar was one of the best suspension mods i ever put on this car. As long as you can keep the front wheels from slipping in the turns, your relatively balanced. Takes away a lot of that nasty understeer.

 

[sayjaibao54]

ok so im thoroughly confused...maybe it's cuz i've had a long day or im a complete idiot, betting on the latter

but here's my question. i have a 99 5spd sedan and if i got the following:
Front --> H&R: 28 x >4.5mm
Rear --> (07-08) Acura TL-S: 20mm

do i need to swap out anything besides the bars?