hotaccord243
Well-Known Member
the setup is:
-a tial 38 mm wastegate
- precision intercooler size 26.75"L x 6.20"H x 3.50"D
-tial blow off valve
-a precision sc-32 t3 turbo with 480 max h.p, and a 360 race bearing system, a 55mm wheel diameter and .63 A/R ratio
-custom built manifold and intercooler piping
- fuel pump
-apexi safc2 to control everything
-boost gauge
and now im working on Golden eagle rods and sleeve, custom je pistons, valves, valve springs, 750+cc injectors, bigger maf/map sensor, aem ems....
and other misc mods....
-a tial 38 mm wastegate
- precision intercooler size 26.75"L x 6.20"H x 3.50"D
-tial blow off valve
-a precision sc-32 t3 turbo with 480 max h.p, and a 360 race bearing system, a 55mm wheel diameter and .63 A/R ratio
-custom built manifold and intercooler piping
- fuel pump
-apexi safc2 to control everything
-boost gauge
and now im working on Golden eagle rods and sleeve, custom je pistons, valves, valve springs, 750+cc injectors, bigger maf/map sensor, aem ems....
and other misc mods....