FIGHT4MYACCORD
Well-Known Member
Re: TURBOG23's *** 11/19/12 *** Update!!
Whats the exact specs of wheels and tires? Thanks man.
Whats the exact specs of wheels and tires? Thanks man.
TURBOG23's 01 coupe***9/23/13 *** Update!!
- Thread starter TURBOG23
- Start date
TURBOG23
Well-Known Member
Re: TURBOG23's *** 11/19/12 *** Update!!
^ 18x9+35 and 225 40
^ 18x9+35 and 225 40
bairdandrew77
Well-Known Member
Re: TURBOG23's *** 11/19/12 *** Update!!
Nice, was the swap/build easy for you?
Nice, was the swap/build easy for you?
TURBOG23
Well-Known Member
Re: TURBOG23's *** 11/19/12 *** Update!!
Honestly I called it quits with the G swap after mayor problems. Just ended up doing an H22 swap wich I plan on finishing tomorrow.
Honestly I called it quits with the G swap after mayor problems. Just ended up doing an H22 swap wich I plan on finishing tomorrow.
BkzTafetta
Well-Known Member
Re: TURBOG23's *** 11/19/12 *** Update!!
looks reel good....any videos of it up and running>?
looks reel good....any videos of it up and running>?
lenz973
Well-Known Member
- Joined
- Feb 18, 2008
- Posts
- 80
- Reaction score
- 0
Re: TURBOG23's *** 11/19/12 *** Update!!
what kind of problems did you run into with the G2
3 setup? you were going to turbo it? As for the h22, what setup are you doing? i had recently done one and it did give real good numbers. i have another accord that i was going to do g23 boost setup but i m thinking of just h22 boost...
what kind of problems did you run into with the G2
3 setup? you were going to turbo it? As for the h22, what setup are you doing? i had recently done one and it did give real good numbers. i have another accord that i was going to do g23 boost setup but i m thinking of just h22 boost...
TURBOG23
Well-Known Member
Re: TURBOG23's *** 11/19/12 *** Update!!
^ The main problem I ran into was oil leaks. Yes, even after I pluged the oil drains. Then I went for a street tune and in the middle of it the bottom end took a dump and broke a rod. After that bought a f23 longblock with bent valves so I could use the bottom end, but when I took it apart all 4 cylinders were full of water tryed to hone the rust out but it was too much. So I got bought a h22 and put it in there with the f23 tranny. For now its all stock I just want the car to be on the road again. But for the future I want to build the h22 and make some real power.
^ The main problem I ran into was oil leaks. Yes, even after I pluged the oil drains. Then I went for a street tune and in the middle of it the bottom end took a dump and broke a rod. After that bought a f23 longblock with bent valves so I could use the bottom end, but when I took it apart all 4 cylinders were full of water tryed to hone the rust out but it was too much. So I got bought a h22 and put it in there with the f23 tranny. For now its all stock I just want the car to be on the road again. But for the future I want to build the h22 and make some real power.
tenog23vtec
New Member
Re: TURBOG23's *** 11/19/12 *** Update!!
hey im doing a g23 vtec build and im almost done just ran into a few problems. im doing the build on my 2002 accord se and im doing a manual swap. i have a problem with the manual swap. im using the axles and trans from a 94 accord lx and the driver side axle on the 94 accord is short on my 02. what should i do?
hey im doing a g23 vtec build and im almost done just ran into a few problems. im doing the build on my 2002 accord se and im doing a manual swap. i have a problem with the manual swap. im using the axles and trans from a 94 accord lx and the driver side axle on the 94 accord is short on my 02. what should i do?
TURBOG23
Well-Known Member
Re: TURBOG23's *** 11/19/12 *** Update!!
^Honestly I dont know what to tell you. My car was already a 5 speed, all i did was an engine swap.
^Honestly I dont know what to tell you. My car was already a 5 speed, all i did was an engine swap.
TURBOG23
Well-Known Member
Update
