Typical noob wheel question

[efcivicturbo]

oem ftw......

 

[efcivicturbo]

I appoligize in advance, but as I said above I have limited use on this forum..

 

[fastflyinaccord]

you could prob get away with 17x8's. dunno about the offset...seen as low as 30 some cars but don't quote me on that

 

[GoldnKnight22]

17x8 +45 won't be a problem at all, from experience. Same with a 18x8 +45 (with a lower profile tire of course).

If anything you'd just need to shave a little off of the bumper tab in the rear wheel wells. Easy.

 

[itzcharlie]

im on 17x8 its no problem at all

 

[AllGOnoSHOW]

I have 17x8 40 offset and before I installed my coilovers I had a 2 inch drop and there was no rubbing or problems

 

[efcivicturbo]

i was thinking 17x8 +35 offset.. but not sure if that offset will cause rubbing

 

[Accord281]

i was thinking 17x8 +35 offset.. but not sure if that offset will cause rubbing

It probably will. With an 8 in width, you want at least +42 offset. +45 is even better. If you went 17x7 +35, that may be a different story.

 

[scrapnav6]

silver sedans from Pa FTW!

 

[efcivicturbo]

ok so if i was to got 17x7 to be safe, whats a good offset that will give it the most aggressive look without rubbing or camber kit