V6 and 4 Cyl Subframe Question

[Audiobox]

Will the subframe from a v6 fit the 4cyl? Or even the cross member?

 

[RedRyder]

Don't think so. Take a look at a parts diagram and compare the drawings/part numbers. You didn't get everything figured out from your other thread?

 

[Audiobox]

I checked the parts numbers and there off by 1 number but both sub frames look the same. But i really dont know enough to tell, lol.

The reason I ask is because its hard to find one around here and theres a shop down the road selling the subframe from a V6.

Edit : Both diagrams are exactly the same

http://www.hondaautomotiveparts.com...atcgry4=KA4AT&catcgry5=REAR+BEAM+-+CROSS+BEAM
http://www.hondaautomotiveparts.com...atcgry4=KA5MT&catcgry5=REAR+BEAM+-+CROSS+BEAM

 

[WHEEELMAN]

Take a good look at your sub frame and the rear cross member. Take pics and/or video camera. Go down to the shop and compare both subframes visually.

I say go to the shop and compare because sometimes those shops don't know what they are selling.


It's hard to go by diagrams sometimes because, sometimes they use the same pic/diagram and just label it with part #'s different.


** Auto vs Manual, subframe and/or rear cross member could be different for these also.

 

[Audiobox]

Just checked and auto vs manual have the same part numbers for the cross member.

I may go back down and take another look at the sub frame.

 

[Sketch o5]

how is this urgent?

its not. at all.​

 

[Audiobox]

how is this urgent?

its not. at all.​

Actually it is, if the part fits I want to buy it before its gone as there hard as hell to find here.

 

[Audiobox]

So from what I heard the v6 sub frame will bolt up but I will have issues with the motor mounts.

Would I be able to bolt/weld the old mounts onto the v6 sub frame and have that work?