What'd you do to your accord today?

[LeAccord]

Whats a good spring rate for accords? I was going with 8k/6k. But someone said in another thread that they're too soft. So would 10k f/ 8k r be good?

Yea I know wrong thread. But figured id ask before I made a thread. Haha.

FF type 1s are 12k/6k default and are a little bouncy in the rear for me .. are you DD your accord?

 

[cirsurvive711]

Got a multiplexor (for a friend) fo freeeee from the junkyard

 

[Shadow1]

FF type 1s are 12k/6k default and are a little bouncy in the rear for me .. are you DD your accord?

Yeah. I DD my CG. And what do you bouncy? Like bouncy soft or bouncy stiff?

 

[truWarier02]

FF type 1s are 12k/6k default and are a little bouncy in the rear for me .. are you DD your accord?

Werd. Rears are quite bouncy but the fronts are nice. Just wish the rears were like 8 or 10 though.

 

[truWarier02]

Just copped a TL-S strut bar and a TASPro hybrid intake from jwong512 today. Thanks again, Johnson!

 

[LeAccord]

Yeah. I DD my CG. And what do you bouncy? Like bouncy soft or bouncy stiff?

Its not stiff enough when you go over bumps and such so depending on how low you are, as you drive over bumps the rear will sort of bounce and the wheels will scrub, even at a pinky finger gap..

Werd. Rears are quite bouncy but the fronts are nice. Just wish the rears were like 8 or 10 though.

Definitely . 10k rears would be nice.

 

[truWarier02]

Just replaced PCV valve. Ah, the little things that get overlooked. Don't think it's ever been changed

 

[Elite1JDM]

Just put on my new valve cover ..

 

[Pumpingiron]

Started blueprinting the engine and got ride of these nasty ****!

I´m waiting for the rings, gasket kit and will see if i´m going with honda bearings or acl!!

 

[SykVSyx]

FINALLY located a mint 02 TL Type S engine harness.