Wheel Fitment Thread

[SoCalAccord2000]

im thinking of F 18x9 +35 with 215/45 and R 18x9.5 +38 225/45 (coupe), how low will I have to go with fender heights to make it look right? also will I be able to make full lock turns? my car currently has rear tab relocated, no fender work ( I plan to roll) will I have to pull at all?

 

[DrOwZee]

Wont wont be able to make full lock turns without rubbing your fender with those specs. its the price you pay. The rears, you might be able to get away with little to no pull.

 

[SykVSyx]

Full lock turns aren't really necessary for everyday driving, especially if you slow down and take corners/turns with caution.

 

[truWarier02]

Full lock turns aren't really necessary for everyday driving

It's necessary when you are horrible at directions and constantly have to do u-turns.

But when no cars around, I just bust a 3-point.. or 5-point turn.

 

[Sleeper Cell]

Three right turns make a left!

 

[Shadow1]

Three right turns make a left!

So much win with this post.

 

[sdhaney]

Waaayyyy earlier in this thread there was a picture of a white sedan on red xxr 16's but I can't find the picture again. Does anyone have more pictures of it by any chance?

 

[Sleeper Cell]

Say no to 16s.

 

[scrapnav6]

Waaayyyy earlier in this thread there was a picture of a white sedan on red xxr 16's but I can't find the picture again. Does anyone have more pictures of it by any chance?

 

[White6GAV6]

Alright so it's about time for me to get some new tires since my 225s are going to be too beefy when I get my coils soon. Rims are 18x8.75 +35, going to get a 25mm and 15mm spacer probably for the time being. I want to run a 205/40 Nankang NS2 tire except they don't come in that size. They do, however, come in a 215/40 or a 205/35. So my question is, would you suggest the 215/40 or the 205/35? Or any other brand suggestions that come in 205/40 that aren't too expensive?