Will these fit

[ubik]

I've seen these wheels and I'm thinking they should go strait on but i'm not 100% sure. It says they are 7j wide and 40 offset and I'm running on a standard suspension set up so with the 225 40 18 tyres will they fit with no rub ?

Heres the link

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=160260056903&ssPageName=STRK:MEWAIC&ih=006

 

[nexTOme]

offset 40 is stickin out a bit...but you can MAKE it fit

 

[ubik]

but you can MAKE it fit

With a big hammer right?

What are we talking here rolling my arches or just a bit of grinding the tabs of the bumper?

 

[nexTOme]

+40, you might have to roll fenders/pull qtr panel out....

you can always stretch tires as well and run negative camber

 

[JMillerUA6]

Me likey!!!

 

[Sakuradrops808B]

With a big hammer right?

What are we talking here rolling my arches or just a bit of grinding the tabs of the bumper?

If you want to tuck the tires:
Slight fender roll, rear bumper tabs have to be modify, also depends is the tire size of your choice. I would say stretch the tire, but just stick with a 205 in width. Or choose a tires brand that has a smaller/curved shoulder. (..eg: Dunlops DZ101 and NOT Falken 595)

 

[ubik]

Can I roll my fenders myself. I've heard people on here talk about doing it with a bat?

 

[Sakuradrops808B]

yeah but do it very very very careful and follow those instructions. In here it costs about 50 bucks per fender.

 

[swollen_cu]

It will not stick out! I am running 17 x 7.5 Racing Hart C2 +40 with a 215/40/17 tire. I have some negative camber with a 2 inch drop and it sits flushh

 

[nexTOme]

It will not stick out! I am running 17 x 7.5 Racing Hart C2 +40 with a 215/40/17 tire. I have some negative camber with a 2 inch drop and it sits flushh

what do you mean it will not stick out?
of course its not going to stick out like sore thumb, but it will def. stick out with 0 camber 225/40 18 tires....
i have RH C4 +42 and sticks out, and rubs with about -1 camber....it rubs barely tho...

you said yours sit flush and doesnt rub, because you have 215mm tire and you have - camber......

which i have stated earlier.....run less wide tire (225mm is wider than 215mm right?), run negative camber, roll fenders/pull qtr panel.....