truWarier02
Well-Known Member
Nvm.
Last edited:
Spacers - Yes/No - Have a look at the pic
- Thread starter sonni_kuba
- Start date
sonni_kuba
6GA Supporting Member
Installed Ichiba spacers 10 mm F and 20 mm R, looks very very good, makes the wheels stand out more visually. Rubbing a bit on speed bumps in the F. Will post pics later today.
RedRyder
Save the manuals
Cool. Where did you buy yours from?
Did you do anything with the front quarter panels? If not, you could bend the tabs upward then tuck the fender liner behind them.
Did you do anything with the front quarter panels? If not, you could bend the tabs upward then tuck the fender liner behind them.
sonni_kuba
6GA Supporting Member
I picked them up from a local store in Toronto, OptionJDM, they have a website too. Don't know if they have the best prices, but they are knowledgeable and cool to deal with.
My front fenders were rolled and the inner liner relocated, I think I am rubbing in the tabs themselves
My front fenders were rolled and the inner liner relocated, I think I am rubbing in the tabs themselves
sonni_kuba
6GA Supporting Member
Pics as promised ...
Here are the rears
Here are the fronts
Finally, here are some of the entire car
Overall, very happy with the results aesthetically. Still getting use to the occasional rub, but now I just take it slower with a full wheel turn, and that pretty much solves all the problems
Here are the rears
Here are the fronts
Finally, here are some of the entire car
Overall, very happy with the results aesthetically. Still getting use to the occasional rub, but now I just take it slower with a full wheel turn, and that pretty much solves all the problems
Valet
IS300 SX > Accord
Man I wouldn't do a thing. It looks great!
sonni_kuba
6GA Supporting Member
Thanks
sonni_kuba
6GA Supporting Member
I got a private message from a member, and I thought I would share the answer with you all.
Ichiba Website Link
For the front, I got ICHIBA Version 1 Hubcentric Wheel Spacers 10MM
MSRP is $105 for a pair
For the rear, I got ICHIBA Version 2 Hubcentric Wheel Spacers 20MM
MSRP is $135 for a pair
Yes, the extended studs and lugs come with them. Hope this helps others.
Ichiba Website Link
For the front, I got ICHIBA Version 1 Hubcentric Wheel Spacers 10MM
MSRP is $105 for a pair
For the rear, I got ICHIBA Version 2 Hubcentric Wheel Spacers 20MM
MSRP is $135 for a pair
Yes, the extended studs and lugs come with them. Hope this helps others.
todd_cards
Well-Known Member
I got a private message from a member, and I thought I would share the answer with you all.
how hard was installation for a beginner ? out of 10 !!!???
Ichiba Website Link
For the front, I got ICHIBA Version 1 Hubcentric Wheel Spacers 10MM
MSRP is $105 for a pair
For the rear, I got ICHIBA Version 2 Hubcentric Wheel Spacers 20MM
MSRP is $135 for a pair
Yes, the extended studs and lugs come with them. Hope this helps others.
how hard was installation for a beginner ? out of 10 !!!???
sonni_kuba
6GA Supporting Member
I am lazy, I had a shop do it for me
From what I understand, they have to remove the old studs, and press in the new studs. You could hammer them in, but that is not advised.
