What'd you do to your accord today?

[RedRyder]

Here's my DIY thread on how to remove the door panels.

http://www.6thgenaccord.com/forums/showthread.php?t=43803


Just follow the steps 1 ~ 12. After removing all of the screws, all you gotta do is pry off the panel with your hand vigorously. (Be brave, it will come off.)
I'm sure you'll have no trouble working on it, if you follow my steps.

Ah sweet, thanks!

EDIT: Added this to the Master list.

 

[Sil2DrV6]

^ You're welcome, Chris.

Oh, Thanks. Hope it helps out some people.

 

[Sil2DrV6]

Finished working on black housed headlights, and installed them.

Updated MR thread w/ pics 'n descriptions.

 

[Hello People]

wrapped my centre console a few weeks ago. I now just need to do my heated seat bezel, but I have a feeling the angles and curves will make it difficult. Anyone have any experience?

Cut out more than you need, and stick it to the flat surface first. Then get a hairdryer or heat gun and heat the vinyl where you're gonna put it around curves. Then stretch and pull it down, like putting plastic wrap around a plate of food.

I did a computer mouse like that.

 

[DizzyP]

Merry Christmas everyone!!!

Three ho's for everyone.
Ho Ho Ho!!!

Working on adding heated side view mirrors. They will be connected to my remote start.




iPhone using Tapatalk, sent from my.

 

[Sil2DrV6]

Got the Acura CL battery box & cover from Santa.

Will be throwing it into my engine bay after my late lunch. (Hopefully it's PNP.)

 

[noelaorozco]

Went to go get an alignment today after installing the coils and dropping it last Saturday.
Sitting at 24.5 F and 24.75 R, moderate drop but rather get it done now so I don't eat up my tires too quick I probably won't get another chance till next year but it'll do for now.

Here are the alignment specs, toe seems to be pretty close to zero so I should be good.

 

[twofast4u]

Cut out more than you need, and stick it to the flat surface first. Then get a hairdryer or heat gun and heat the vinyl where you're gonna put it around curves. Then stretch and pull it down, like putting plastic wrap around a plate of food.

I did a computer mouse like that.

That is freaking awesome! Thanks for the tips!

 

[CokeZero]

Installed some new headlights and put an ebay intake on it.

 

[truWarier02]