About to order F2 Type I's!

swollen_cu

Well-Known Member
Joined
Jun 18, 2008
Posts
3,632
Reaction score
5
Location
New Orleans
well I found a sponsor on H-T and talked him down to 600 shipped for a set of F2 type I's! what do yall think?
 

swollen_cu

Well-Known Member
Joined
Jun 18, 2008
Posts
3,632
Reaction score
5
Location
New Orleans
just bought em! they gonna ship out either tomororw or early thursday! WOOT WOOOOT SLAMMAGE FTW!!

BTW i have a question about camber kits. I found an SPC and an Ingalls kit, but the spc kit says it is meant for vehicles lowered only up to 1.5 inches.. but i am planning on tucking the tires.

SPC kit: http://cgi.ebay.com/ebaymotors/98-02-Honda-Accord-SPC-Performance-Camber-Kit-60040_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQitemZ400019017805QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Ingalls kit: http://cgi.ebay.com/ebaymotors/INGALLS-FRONT-REAR-CAMBER-KIT-98-02-HONDA-ACCORD_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem180319372501QQitemZ180319372501QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Which kit would yall buy?
 
As an eBay Associate we earn from qualifying purchases.

mista jc

Well-Known Member
Joined
Mar 28, 2007
Posts
1,055
Reaction score
3
Location
San Joaquin Valley, CA
Wait until sleeper cell comes in here to tell you not to get a camber kit with coilovers. Be gangsta and run camber for that stance everyone wants. Scratch the camber kit
 

LitoCG2Rider

Well-Known Member
Joined
Jul 20, 2007
Posts
1,125
Reaction score
5
Location
MA,New Hampshire
Lol you want slam and tuck tires? You can't tuck tires with + cambers...on top of that the only way of seein u being really slam in stage 3 is ridin on 17s with urber low profile tires.....soo do yourself a favor and don't think about camber kit if you looking for those 2 thing you got in mind because it isn't happenin...tuckin tires you will need atleast -3 camber.. -2.5 is close enough but you will need to roll fender and relocated the bolt that most of the members do on here soo the tire won't rub...once yu get the coilover install just wait a week or so then get the aligment done...correct the toe...leav the camber alone.

Negative camber ftw!
 

swollen_cu

Well-Known Member
Joined
Jun 18, 2008
Posts
3,632
Reaction score
5
Location
New Orleans
Lol you want slam and tuck tires? You can't tuck tires with + cambers...on top of that the only way of seein u being really slam in stage 3 is ridin on 17s with urber low profile tires.....soo do yourself a favor and don't think about camber kit if you looking for those 2 thing you got in mind because it isn't happenin...tuckin tires you will need atleast -3 camber.. -2.5 is close enough but you will need to roll fender and relocated the bolt that most of the members do on here soo the tire won't rub...once yu get the coilover install just wait a week or so then get the aligment done...correct the toe...leav the camber alone.

Negative camber ftw!

I want it as close to factory setttings as i can get. I will probably just get the front camber kit so i can run close to factory settings as possible. I am running on stock 15" Alloys right now.
 

swollen_cu

Well-Known Member
Joined
Jun 18, 2008
Posts
3,632
Reaction score
5
Location
New Orleans
I know camber doesb't effect tire wear as much as toe, but how much does it ? I plan on dropping it about 2.5 inches.
 
Back
Top