Cutoff projector sheild

[NotNice]

uhh you can... hence the whole concept of retrofitting(slapping 2 random parts together)... just takes customization... duurp
Thanks for the HIDPlanet idea. Ill check it out but I will probably just end up making one myself with some sheet-metal

Ye thats the best thing to do.u jus wont have hi beam out of it

 

[shenaniganz08]

uhh you can... hence the whole concept of retrofitting(slapping 2 random parts together)... just takes customization... duurp
Thanks for the HIDPlanet idea. Ill check it out but I will probably just end up making one myself with some sheet-metal

subscribed for the inevitable duurp

 

[20-CG5-01]

subscribed for the inevitable duurp

You still have those FX45 projectors? Looks very very clean and especially the big cutoff

 

[ParisiOT]

well, just bought some sheet metal from home depot so the project begins.. I got enough to accommodate trial and error, as well as adjustments. Ill prob try to make a DIY after all is done. Anyone know how high to make the cutoff, relative to the bottom? I was gunna try half way and see how that does.

 

[shenaniganz08]

You still have those FX45 projectors? Looks very very clean and especially the big cutoff

actually they are fx35 projectors (fxr lens, lens spacing, for sharpness/color) running at 55w but they are pretty similar to fx45

Picture of just the projector after tweaking it

and what it looks like inside the headlights (you lose sharpness and a bit of output)

 

[20-CG5-01]

actually they are fx35 projectors (fxr lens, lens spacing, for sharpness/color) running at 55w but they are pretty similar to fx45

Picture of just the projector after tweaking it

I envy your ability to make sexy *** retrofits.

 

[ParisiOT]

maaaan that looks clean you really went all out and changed every light inside