Search results

  1. A

    Power window help!

    So both sides are broken exactly the same way? There's not much to do other than to remove a door panel and see what is wrong. It's usually pretty obvious once you can see all the parts.
  2. A

    FS Section

    That might make sense for FS threads, but not for WTB threads. New members are more likely to not have their car setup the way they want and be looking for parts. Who are you protecting the new members from in this case? I don't make a lot of "yeah, me too" kinds of posts so I know it will...
  3. A

    failed emissions :(

    Was the exhaust hot for the test? My last test I was stuck in line long enough for the catalyst to cool enough to fail. I retested when there was no wait and passed.
  4. A

    Low oil light in Tacho

    Flashing means that the oil pressure was low briefly. Were you cornering when it happened? I know older Accords can have the oil move away from the pickup during extended hard left cornering resulting in a brief loss of oil pressure.
  5. A

    2 + 2 = Bent LCA?

    I forgot to add that the idea of shifting subframes was suggested by the mechanic performing my alignment at a Honda dealership. He said some new car's subframes needed adjustment before they could sell them. This was in the early 2000s when these Accords were still for sale new.
  6. A

    2 + 2 = Bent LCA?

    I've removed both front and rear subframes on older Hondas with good results. The rear camber was uneven side to side. I was able to get it a little closer to equal (and replace a bad eccentric toe adjusting bolt). I've successfully replaced a complete front subframe (LCAs, radius arms, front...
  7. A

    2 + 2 = Bent LCA?

    Have you tried adjusting the subframe? Loosening the bolts and shifting it in the correct direction could get the caster closer to spec.
  8. A

    20 mm rear antiroll bar with stock suspension

    The Accord end links work fine it they're in good shape (mine were). I've heard the Moog end links on rockauto.com are good if you need replacements though.
  9. A

    20 mm rear antiroll bar with stock suspension

    52300SEPA11 bar Two of each of these: 52306SEPA11 bushing 52308S3MA00 bracket
  10. A

    How do you adjust belt tension?

    I'd guess he's referring to your alternator and A/C belt or your power steering pump belt. They're drive belts too. The alternator belt has a tension adjuster botl you'd need to back off a little and then a pivot bolt to loosen to allow the alternator to move a little to relieve the belt...
  11. A

    Car needs help.. :(

    If you clear the codes do the same ones come back?
  12. A

    20 mm rear antiroll bar with stock suspension

    I figured I should list what I thought if anyone else is considering the same change from 16 mm -> 20 mm rear anti roll bar. The car rotates a lot better. There is much less understeer. The ride quality is the same. As expected stiffening one part of the car emphasizes the compliance of...
  13. A

    Sway Bar Size FAQ

    I didn't think my ear was good enough to tell the difference between ~5 mm of steel and a solid bar. Besides, unless you're willing to drill a hole this is the only way to be sure.
  14. A

    Sway Bar Size FAQ

    Re: Sway Bar Sizes Sure there's a way to tell. I weighed my stock 16 mm rear sway bar and the 20 mm TL rear sway bar when I swapped it out. They're both solid. Here's how I'm sure: For the 16 mm: Measured mass 2.240 kg 1.36 m bar length without ends Assume the bar is solid...
  15. A

    High Mileage 6th Gens

    It drives well. It's in good shape for it's age--I'm the second owner.
  16. A

    Honda Accord 98-02: Pollen/Dust Filter Rplcmnt

    Here's a decent video: http://www.youtube.com/watch?v=vMRvqYsI2k4 Hopefully I can get rid the smell by swapping mine out.
  17. A

    High Mileage 6th Gens

    239k on my 'new' 1998 EX sedan. My '89 Accord hatchback has 412k though.
  18. A

    20 mm rear antiroll bar with stock suspension

    I've been considering getting the 20 mm TL rear antiroll bar for my '98 EX sedan. After lots of searching here I've read some very positive opinions on the change. Unfortunately nearly all of the members that had tried this sway bar have other significant suspension modifications. I'm...
  19. A

    FS: Parting out my silver accord :(

    Are you still parting out? Do you have the black plastic exterior trim from behind the driver's window?
  20. A

    FS: 6th gen parts

    Would you be willing to sell just the NGK wires?
Back
Top