Search results

  1. BlkCurrantKord

    J32A2 + 6MT swap in my '01 F23/H23 5MT chassis

    Accelerator pedal sensor assy - I can try and dig through the wiring diagrams here at work in my spare time if you're interested
  2. BlkCurrantKord

    Trying to find a part for an ac compressor

    38838-PAA-A01 -VALVE, SUCTION SERVICE discontinued, have to swap it over from yours. Don't damage the o-ring, can't get that either. Or find one at a junk yard #7 - assuming its a 4cyl, which it looks like.
  3. BlkCurrantKord

    Trying to find a part for an ac compressor

    38838-PAA-A01 -VALVE, SUCTION SERVICE discontinued, have to swap it over from yours. Don't damage the o-ring, can't get that either. Or find one at a junk yard #7 - assuming its a 4cyl, which it looks like.
  4. BlkCurrantKord

    Replaced motor

    Haha, got the MAP & TPS connectors backwards
  5. BlkCurrantKord

    No. Everything is a direct bolt on

    No. Everything is a direct bolt on
  6. BlkCurrantKord

    I never swapped my prop valve. Worked just fine

    I never swapped my prop valve. Worked just fine
  7. BlkCurrantKord

    Need a opinion on this used shocks...

    Have you tried a local junkyard
  8. BlkCurrantKord

    Does anyone recognize these wheels?

    Being that they're dual drilled, probably something generic
  9. BlkCurrantKord

    Fuel spraying out

    Replace all the lines with nylon ones
  10. BlkCurrantKord

    Exhaust Recommendations

    The magnaflow is pretty good, not loud at all or drone to it. Wouldn't hurt to price out an ebay header, an oem 50 state cat (magnaflow) and maybe a vibrant resonator and muffler if there's a halfway decent shop around you that can bend and weld.
  11. BlkCurrantKord

    NO HEAT!

    All hoses hot/warm when vehicle is up to temp?
  12. BlkCurrantKord

    Polyurethane Engine Mount Inserts

    Yes they'll work
  13. BlkCurrantKord

    transmissions options

    6SPD Swap it. There's a write up on here and this was just posted https://www.6thgenaccord.com/forums/threads/03-cl-type-s-manual-transmission-for-sale.54903/
  14. BlkCurrantKord

    Will the 6th gen accord go up in value?

    It would be a very small niche market if there was one.
  15. BlkCurrantKord

    98 lx inline 4 wont rev out over 4k rpm

    Change the oil
  16. BlkCurrantKord

    Up grades and need assistance figuring out misfire issues

    Check the EGR
  17. BlkCurrantKord

    RARE Accord Type R 2.2 Wheels

    So...why don't you contact him and ask him to source you a set or get you in contact with someone who can source you a set?
  18. BlkCurrantKord

    Richard's '03 CL-S 6MT

    No, they have to be ordered by the dealer, every time. So call in, give them your VIN and schedule your appointment.
  19. BlkCurrantKord

    Richard's '03 CL-S 6MT

    Parts for the 96-01 Driver's Airbag recall just became available yesterday. They still have to be ordered and typically take a day to come in (at least for me) and are ordered by VIN. If your SRS light is on, it's not covered under warranty. *However* if your seatbelt doesn't latch and its...
  20. BlkCurrantKord

    j30a1 headers, 99 accord

    lmao truf
  21. BlkCurrantKord

    j30a1 headers, 99 accord

    OBX is the only brand I'm aware of, if they're even still around.
  22. BlkCurrantKord

    Hello!

    Should be able to get to that heater hose just by taking the intake tube off. May have to reach with some long pliers for the clamps but should be more than doable with the intake tube out of the way. btw welcome
  23. BlkCurrantKord

    No, I can't just "give" you permission. You have to accumulate posts before sending pm's and...

    No, I can't just "give" you permission. You have to accumulate posts before sending pm's and posting items F/S. Forum rules.
  24. BlkCurrantKord

    6 speed swap parts list! (organized)

    The trans, starter, clutch, flywheel, flywheel bolts, shifter linkage, axles, mounts/bolts, clutch & brake pedal assy's and associated sensors. I would pull the entire engine harness and label all plugs as you do it also. I would probably replace the clutch & flywheel while you're doing the swap...
  25. BlkCurrantKord

    New guy with transmission questions

    Try www.car-part.com - They're out there or a reputable shop that could rebuild it. Where in Mich are you? I "might" have a buddy who still has his old auto laying around. No idea if its still good or not

Latest posts

Random media

466.jpg
6560.jpg
4329.jpg
rear lower stress bar and some people only do exhaust tips and think they are doing something, those who know do from the cat back... not including t
snowwy day feb.3 2009 016
Back
Top