Search results

  1. CDsDontBurn

    Brand new 6GA...basically

    $13k is a decent down payment on that F-150 I've been wanting...
  2. CDsDontBurn

    High Mileage 6th Gens

    Looks like I do about 10k every 6 months, lol.
  3. CDsDontBurn

    High Mileage 6th Gens

    327,645 as of today's oil change.
  4. CDsDontBurn

    Hello new here

    Welcome! This is definitely the site to be at if you have go-fast goals done right. Other Honda / Accord forums are more for keeping your ride running stock.
  5. CDsDontBurn

    Caliper Bracket Bushing replacement

    I'm really curious as to what bushings these are then. On the v6 all 4 corners are just slide pins with the rubber boots. No bushings on the caliper itself that I know (or remember) of.
  6. CDsDontBurn

    Caliper Bracket Bushing replacement

    I guess it's too late now, but how about THESE?
  7. CDsDontBurn

    Caliper Bracket Bushing replacement

    Are you talking about THIS?
  8. CDsDontBurn

    OBD2 “no link” help

    So what ever happened?
  9. CDsDontBurn

    Green beans 2002 sedan special addition

    Just be sure that the timing belt has been done within the last 7yrs as the frequency for that is 100k miles OR 7yrs, whichever is first. It's about a $150 job in parts if you do it yourself, or in the $700 range if you take it in somewhere. It's a great find regardless!
  10. CDsDontBurn

    OBD2 “no link” help

    Was your OBD-II scanner plugged in all the way? Did you try unplugging it and plugging it back in?
  11. CDsDontBurn

    *HELP* Cluster Lights and Tail Lights went out after installing aftermarket radio

    ^^ Should be fuse #14.
  12. CDsDontBurn

    1998 Accord P1607 Alongside other sensor high voltage codes

    Tell me more about this '97 Thunderbird. I have one as well and am on a Thunderbird forum, TCCoA. Lots of good info there :). It's not just the immobilizer. The key is also married to the ECU. So the ECU basically verifies that the key being used (through the immobilizer) is the correct...
  13. CDsDontBurn

    1998 Accord P1607 Alongside other sensor high voltage codes

    Did you take the donor ECU to a stealership to have it programmed to your car?
  14. CDsDontBurn

    Intermittent Start

    what engine? What transmission? You said "sometimes" is resolved by going through all the gears. What other ways, if any, can it be resolved? You said it won't crank. So, will the starter simply not engage and the engine not crank? Or will the starter engage and the engine not fire up?
  15. CDsDontBurn

    Overheating?

    You need a Bluetooth OBD-II scanner like this one and the Torque App
  16. CDsDontBurn

    Overheating?

    When I did the leakless gasket repair (link in my OP), I changed out the thermostat with a new OEM one. Radiator is about 6yrs old, but it doesn't show any signs of any gunk buildup. Radiator / coolant system was last flushed when I did my timing belt back in early 2016. Coolant I use is...
  17. CDsDontBurn

    Overheating?

    Turning off the AC is recommended when an engine is overheating as it is less strain on the engine because it's one less component for the engine to rotate. Turning up the heat when the engine is overheating is the immediate recommended solution when an engine is beginning to severely overheat...
  18. CDsDontBurn

    What else to replace/service while I'm replacing timing belt?

    If you do have to do all that, then you might as well get some headers while doing all that work!
  19. CDsDontBurn

    What else to replace/service while I'm replacing timing belt?

    Spark plugs Any weak / swollen coolant hoses
  20. CDsDontBurn

    Overheating?

    Two weeks ago, I did the Leakless gasket fix on my 6GA with success. The initial reason why I did it, aside from the obvious leaking of coolant, was because my engine temp had shot up despite the fact that I had just added coolant a few days earlier because of the leak itself. So I do the...
  21. CDsDontBurn

    1998 Accord P1607 Alongside other sensor high voltage codes

    I would start with that. Pull an ECU from an Accord at your local junk yard and take it to your Honda / Acura stealership to have re-programmed for your car.
  22. CDsDontBurn

    Idle Problems

    +1 on the EGR port / valve. Didn't think of that.
  23. CDsDontBurn

    1998 Accord P1607 Alongside other sensor high voltage codes

    Well, P1607 is for ECU / PCM. You will likely have to replace it. But do some troubleshooting first. The Drive Accord link below has some steps for you to troubleshoot by removing a few fuses and whatnot...
  24. CDsDontBurn

    Idle Problems

    I'm guessing the IAC valve, but you're right. We must verify what valve. @ OP: what engine do you have? That's also important to know.
  25. CDsDontBurn

    code P1491 - EGR Valve Insufficient Lift - safe to drive?

    I'm sure it's a bit late for this, but the 500mi trip would probably have been fine with the CEL. However, the car would probably have had some engine hesitation or other issues relating to this CEL. Did you end up doing the trip with the CEL on, or did you postpone the trip? As for the trip...

Latest posts

Random media

4045.jpg
IMG 1979
Complicated
profile 1
Turbo Sale (3)
Back
Top