Search results

  1. Egi7

    a real answer to Throttle Body Spacers...do they work?

    lol, I was meaning that the same "flow characteristics" were achieved by the bigger throttle at 30% when it theoretically would take the smaller TB more input. Maybe it was my choice of words but "basically" I was in total agreement with you!
  2. Egi7

    a real answer to Throttle Body Spacers...do they work?

    Iam not talking in terms of MAX flow, iam was reffering to intake velocity and volume( "the TBS issue"). Your statement about "opening it up 30% would yield the same effect as opening up the smaller one 50%" is true being that they both end up with the same diameter and circumference..lol :p...
  3. Egi7

    a real answer to Throttle Body Spacers...do they work?

    Not always, neccessarily. Manifold design also plays a role in throttle response at lower rpms. The f23 manifold, in itself, is already designed for quick throttle response, being that it has short runners and a big plenum. I would better advocate a aftermarket throttle body, if one wanted to...
  4. Egi7

    a real answer to Throttle Body Spacers...do they work?

    Case closed, Throttle body spacers do absolutely sh!t. Its the same concept as the plenum stackers people put on dual runner manifolds, to increase the volume.
  5. Egi7

    I want to turbo my f23

    Drag car? im going to need some evid. on that
  6. Egi7

    H23 headers

    Unless you are going for a real custom race header with anti-revision chambers, all of the regular ones will be about the same, in terms of performance. DC, megan, greddy, kamikaze etc.
  7. Egi7

    FF12...and whatever games you guys are playing

    I play mostly PC games. Iam a FPS junkie..lol. Unreal Tournament 2k4, Counter Strike source, Quake 4, Doom 3, Americas Army, etc. I also play a few simulators ie: Ceaser 4, Medevil total war
  8. Egi7

    header/ exhaust wrap

    My AEM CIA intake is wrapped, and seems to keep the pipe a little coolor than without it. Plus overtime the wrap has seemed to glue itself to the intake pipe..lol. Being that aluminum intake pipes are the coolest, the wrap just aids in process of keeping the intake at slightly lower temps. I...
  9. Egi7

    Fellow F series..

    ooops, wasnt trying to be sarcastic....... :D
  10. Egi7

    Fellow F series..

    you cant, only the obd1 cars allow the ignition timing adjustment via the distributor. Which is done using a timing light, to advance or retard
  11. Egi7

    engine swap

    well...on second thought you could get a low milage obd2 H23. They usually go for $800. Nothing spectacular, and a moderately fun engine. Or, just throw another f23 in, if that's still too much
  12. Egi7

    New member, Turbo accord (56k)

    indeed, they do
  13. Egi7

    Hospital..

    Dont feel bad man, I used to drink heavy every weekend at college. Then one weekend, mixed Everclear and hawian punch TOO STRONG :huh: , and d@mn near almost died from intoxication. But for "some" reason i pulled through the night. I was wasted for 2 1/2 days. Horrible feeling
  14. Egi7

    THE Ultimate, end-all guide to doing an OBDII to OBDI conversion on a 6th gen accord!

    Nice write up shark!!! Thats basically everything i have purchased, I only needed the obd1 dizzy because iam using the H23 head. Also if any of you are planing on going with a piggy back system ie: Uber or Crome, you will need a eprom chip programmer and a UV chip eraser, along with a few minor...
  15. Egi7

    Fellow F series..

    Excellent choice Sonnick, That bisi stage 1 camshaft will open the f23 up for sure. I remember when I talked to him some time ago, he told me that you can run up to 0.588 lift on a f-series motor before you'd run into piston valve clearance issues, but with an H, no way. There is no doubt, that...
  16. Egi7

    Cammed!! G23 NonVtec build-in progress

    Carlos (wikked) is in kissimme fl. He had the f22/h23 combo
  17. Egi7

    Cammed!! G23 NonVtec build-in progress

    he is near the jacksonville area. I will be the first 6th gen or CG3, that he has done a G series on. He is well known on cb7tuner.com. He also posted a vid of his old G23 non-vtec hybrid, runnin threw the gears, pretty quick car.
  18. Egi7

    DarkSideAccord's 1999 G23 powered I4 sedan (56K go sleep)

    Ahh Ha, Web stage 1, thats all i needed to know, thanks for the info hehehehe.......................lol
  19. Egi7

    DarkSideAccord's 1999 G23 powered I4 sedan (56K go sleep)

    What cams are these, might I ask?
  20. Egi7

    H23A VTEC Swap

    Very true. All the f23 lacks is a good port flow design and cam definition. Bisi fixed that with is all new cam line. He is posting his cam specs at 0.050, not that advertised duration stuff. Meaning that he has got some "real deal" vtec grinds for the f23. Throw some decent compression into the...
  21. Egi7

    H23A VTEC Swap

    his is reffering to the Accord SiR wagon motor, which is the jdm H23vtec. Yes its factory made. Good motor
  22. Egi7

    Cammed!! G23 NonVtec build-in progress

    Ok, the swap date has been set. Spring break March 12-17. I'll be going to FL, and Carlos aka "WikkedV15" will do the swap. He has done numerous G-series swaps including g23vtec. He will also wideband tune my engine with uberdata 1.7. I should be the first 6th gen accord to complete a G. Should...
  23. Egi7

    okkkk my engine!!

    :confused:
  24. Egi7

    okkkk my engine!!

    Iam, and you will "Never" see me post ridiculous crap like you did in your thread starter. By the way, theAccordian, that sh*t was funny as hell. :rofl: -Mike
  25. Egi7

    Brand new "Yokohama AVID H4S" 205/60/15

    Thanks man

Latest posts

Random media

IMG00021
3659.jpg
IMG 20121112 163031
after putting on my rear lip kit....nice and snug
189
Back
Top