Search results

  1. Dnguyen211

    Transmission problem no gear

    It has 200K and I have many cars in my disposal at the junkyard, hoping it was a solenoid or a sensor or something
  2. Dnguyen211

    Transmission problem no gear

    So I just bought a 2000 4cyl automatic accord and I need some help from my fellow 6genners... The guy said on his wife's way back from work one day the tranny started slipping so he parked it for a couple days I believe and did some research and thought a tranny flush would help... Clearly it...
  3. Dnguyen211

    Free Vehicle history report

    Let me start off with saying I'm sorry if this doesn't go here... So I am wanting to buy another V6A and the problem is the story and stuff sounds a bit sketchy so I wanted to know if anyone knows how to get a free vehicle history report??
  4. Dnguyen211

    Annoying seat problem!

    Took a locking washer and jammed and banged the **** out of it to get it in and now it's all good!! Thanks for the help
  5. Dnguyen211

    Sub and box hookup

    I take that back, the subs are only single channel and the guy who sold it to me lied... Close thread please
  6. Dnguyen211

    Sub and box hookup

    Don't really know much about the subs except they're flat piston 12'...they're pretty old but still pound pretty hard, the amp is a 1200 watt Sony explod model number is mx-1600GSD
  7. Dnguyen211

    Sub and box hookup

    So I brought this sub for a guy along with an amp... It is a ppi flat piston 12' sub and there are two in a ported box. I cannot figure out why the last guy wired it up like this... + and - from channel one of the sub to the left port, + and - from channel one on the other sub to port on the...
  8. Dnguyen211

    Annoying seat problem!

    This problem is annoying! How can I fix this without getting a new seat? https://youtu.be/4UqOa5Ba27k
  9. Dnguyen211

    Doesn't want to run

    I know of a really good auto electrician guy who has been doing electrical for over 20 years so I maybe give it to him to look over
  10. Dnguyen211

    Doesn't want to run

    So this morning I got sick of the problem and I was sure I had no other check engine lights and the code to which tripped it was p1607 so now I am sure that code is the problem
  11. Dnguyen211

    Airbag light

    I shorted the connector it took me like 5 tries
  12. Dnguyen211

    Flashing check engine light, help

    Since it's only a 4CYL with one cylinder misfire it will run tough, I had like 3 misfires in my v6 and it ran really rough, probrably as rough as yours so I know the struggle
  13. Dnguyen211

    Stock wires

    So I was looking around but could not find the gauge of the wires.... I would like to ask for help what is the gauges of the wires coming from the battery terminal on the positive and negative side so I can order a aftermarket battery terminal for my almost ready Big 3 upgrade.
  14. Dnguyen211

    Engine bay ground

    Does anyone know if I could just remove the current positive power wire from the fuse box to the alternator and just run a straight one from the battery to alternator?
  15. Dnguyen211

    Engine bay ground

    That would be great!
  16. Dnguyen211

    Engine bay ground

    My car was lemon lawed back in 2003 for a bad tranny and was replaced, while looking over my grounds I saw the ground wire connecting the transmission to the chassis was a decrease in gauge from the chassis to halfway through the wire was like a 8 gauge or something like that and the other half...
  17. Dnguyen211

    Airbag light

    Please close this thread, problem solved
  18. Dnguyen211

    Airbag light

    So my airbag is on and I know there's a way to short out the obd2 connector to retrieve them but I couldn't get my car to spit it out, Is there a way to see what component is wrong by disconnecting their connectors? Posted in the wrong Place Admin please move.
  19. Dnguyen211

    Engine bay ground

    I am very active on the forum.
  20. Dnguyen211

    Engine bay ground

    So in this thread I am going to say what I am thinking about doing and I also have some questions and would like some opinions and recommendations on this.... First off I am not only doing this for a cleaner idle or the sound system but I went to an excellent mechanic friend of mine to ask him...
  21. Dnguyen211

    DIY: Switchblade Key

    Mine came with two master keys and a grey valet one
  22. Dnguyen211

    Tires rubbing in the rear? - clicky

    Alright, old thread but I need help, so I lowered my car on 225 50 16s and it's rubbing on bumps and I don't want that anymore... Is there specific pictures of the aftermath? I really don't want to mess up my bumper
  23. Dnguyen211

    Key not working with all

    No, I used my master black rubber key instead of the grey rubber which is just my spare sitting inside my house. When I use the old key it opens it all but the key on the switchblade won't...
  24. Dnguyen211

    Key not working with all

    Did this problem resolve itself with you
  25. Dnguyen211

    Key not working with all

    I recently got my switchblade key cut and it works in the ignition and the doors if I jiggle it a bit but I cant lock my glovebox or open my trunk yet I use these options frequently all help is thanked!

Latest posts

Random media

currently as of 7/2010
1244339208271
IMG 20150216 185421
QQ??20151024085612
Driver's Door Shot
Back
Top