Search results

  1. P

    FS: ★ CROWER RODS/CP PISTONS Russianred's Turbo & Performance Parts Thread|Updated: 7/3 ★

    Re: ★ Russianred's Turbo & Performance Parts Thread | Updated: 1/4 ★ FREE:
  2. P

    Header and Exhaust

    He wrote: my 99 lx sedan i4
  3. P

    CL-S front strut bar

    No i have the engine out for now...but if i go with your signature...i really don´t know with a J series, i´m running a h22..... but if you can notice something with a pic from another angle just tell me and i will try to take it!!!
  4. P

    CL-S front strut bar

    Mine! Custom made! Love it, i have to make a better 3rd mounting point since the part it mounts to is very thin sheet metal....must make a little upgrade there!
  5. P

    FS: ★ CROWER RODS/CP PISTONS Russianred's Turbo & Performance Parts Thread|Updated: 7/3 ★

    Re: ★ Russianred's Turbo & Performance Parts Thread | Updated: 11/24 ★ Did you got my infos? Very interested!
  6. P

    FS: Ingalls rear camber kit.

    Re: Ingalls Camber kit. Details revised 12/2 Is the bushing sleeve free floating like in a ES kit? You know the metal sleeve is not attatched to the rubber, oem ones the sleeve is fixe with the rubber (that´s why you should torque arms with the car in is ride height/in the ground)?? car...
  7. P

    FS: Ingalls rear camber kit.

    Re: Ingalls Camber kit. Details revised 12/2 The sleeve in the bushings are free? I mean is not like oem how you need to unload them at car height seat?!
  8. P

    FS: Ingalls rear camber kit.

    Re: Ingalls Camber kit Can you ship it to Portugal? How much?
  9. P

    FS: ★ CROWER RODS/CP PISTONS Russianred's Turbo & Performance Parts Thread|Updated: 7/3 ★

    Re: ★ Russianred's Turbo & Performance Parts Thread | Updated: 11/24 ★ Can you check shipping to Portugal of the Pspec and engine mounts please?
  10. P

    Hey mister, Can you check for a good price for the Pspec and Engine mounts please?? Shipped to...

    Hey mister, Can you check for a good price for the Pspec and Engine mounts please?? Shipped to Portugal, paiment throughout Paypal! Thanks
  11. P

    AEM 2pc rotors

    In my opinion these kind of discs are overrated... Did you saw what SportCar Motion use in their Dc2 track car? RL discs(300mm like mine oem) with spoon calipers... Plain discs, not perforated or grooved... http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/396268_10150470158529470_931267644_n.jpg
  12. P

    Spring rates

    I had Neuspeed spec Koni sp3 and neuspeed race on my ek4, in the top groove it was amazing how the car react, and since i was only at 1.75-1.5" drop it passed the inspection and had no trouble in the streets! In that case since no extended top plate or short rod shock are available for me i...
  13. P

    Spring rates

    I´m also tempted to the Ground Control coilover sleeve....but since we have inspections and legally not allowed to have a "modified" cars i´m looking for other ways...until i get piss-off and buy a GC kit lolll
  14. P

    Hi from oversees!

    Thanks guy´s, as for the Progress RSB Racetechperformance as top of the line prices...but only ships in the US...:eusa_wall:
  15. P

    Spring rates

    Hi I was looking for some spring rates of my ch1 and found other spring rates aswell!! I´m looking for neuspeed race or h&r race spring rates if someone have it! OEM CH1/CL1 (measured not 100% valid) F: 323lbs/in R: 190lbs/in Tein USDM: HTECH F: 268lbs/in R: 140lbs/in - 4cyl. 2/4doors F...
  16. P

    Hi from oversees!

    I lived in Canada for 20years, plates from my first cars...like a souvenir!!
  17. P

    Hi from oversees!

    Hi again guy´s i don´t know if I can still post in this tread or start a members ride´s post but anyhow there goes some updates: Been busy at work and family i been out from forums and stuff for awhile but noticed a little noise in the engine and then...POW T-belt snapped.... Well when I...
  18. P

    What'd you do to your accord today?

    Started blueprinting the engine and got ride of these nasty ****! I´m waiting for the rings, gasket kit and will see if i´m going with honda bearings or acl!!
  19. P

    Could it be true?

    http://honda-tech.com/showthread.php?t=2794785 From Syncrotech themselves if any dough's talk to them directly they are pretty good fellows (at least the Mfactory representative in europe)!
  20. P

    DIY custom trunk strut bar....

    http://www.nextgentuning.com/Ultra_Racing--category--44.html They are the suppliers in the US...but didn't have this bar 'cause is for the JDM ATR... You can still have it if you ask! I put this option in the topic more to give ideas to custom made one, i'm pretty sure they will cost to much...
  21. P

    DIY custom trunk strut bar....

    Ultra Racing sells it! http://www.ultraracing.com.my/Catalog.asp?Brand=Honda&Model=Accord%20CF4,CL1&page=1 It's for CL1 but is even the same thing to my CH1!
  22. P

    Could it be true?

    You guys don't know Mfactory? They work together! http://www.teammfactory.com/helical-lsd
  23. P

    DIY custom trunk strut bar....

    This one should fit!!
  24. P

    please answer!!!

    POW! Right in the kisser!!!
  25. P

    Custom or bolt on

    Custom FTW I will do soon mine in 3'' b-pipe splitting to 2.5''!

Latest posts

Random media

424911 2890229852175 1153096484 32831254 1456368090 n
Lip & Fogs installed
None
IMG 0717 1
20130514 7
Back
Top