Search results

  1. H

    Turbo kit BACK on, Only getting 4/5 psi ?

    We boost leak test up to 30psi at the shop with everything attached. Check your injector seals, couplers, throttle body and etc for leaks. Nothing should leak if it is done correctly. What line is leaking on the fpr? Do you have zip ties on your vacuum lines?
  2. H

    Turbo kit BACK on, Only getting 4/5 psi ?

    Have you done a boost leak test yet? Also just about every hks bov ive seen the vacuum nipple pops out. Doesn't hurt performance. Just reattach it. If you actually want a better bov upgrade to a tial.
  3. H

    k20a2 pistons

    Guess you haven't done any research at all. Good luck with the build.
  4. H

    Houston Accord Spring Bash. 3-8-14

    Meet is not supposed to be posted on Houston-Imports. Thanks for your co-operation. Where: F.I.S.T-Racing / Collins automotive 11814 Champion Forest Dr Houston Tx 77338 When: March 8th. 12pm-6pm Who: Accords of all generations. Why: Good times Rules: 1) Bring us Alcohol. Coolers will be set...
  5. H

    F23a1 destroker turbo. Start to Finish.

    I don't like to talk about the cost. It was done for fun. :waytogo: Prolly saved 40lbs from the stock crossmember. Works great don't have anymore wheel hop. I'm not using a front motor mount at this time. Just using a solid innovative rear mount. The traction bar doesn't have a spot to...
  6. H

    F23a1 destroker turbo. Start to Finish.

    Yes the valve cover and brake setup is hydro dipped. Here is a pic of my Brembo BBK setup. Work was done by houtson hydro dip. They do great work. The clutch works great. I like it. Should hold up fine for my goals. Looking to push 400whp once I get all the kinks worked out and install my...
  7. H

    F23a1 destroker turbo. Start to Finish.

    Oops fixed the typo.lol. No reason why I chose it over anything else. Sold my h22 turbo manifold a while back. So made this since its what I had laying around.
  8. H

    F23a1 destroker turbo. Start to Finish.

    Having fun with the car. Just need to get it up on the dyno and finish tuning it for some numbers. Hope you have enjoyed the thread. That is all. Accord antilag vid
  9. H

    F23a1 destroker turbo. Start to Finish.

    Waiting on my clutch to arrive then I'll be dropping it in and firing her up. :D Rebuilding my h22 trans and installing lx 5th gear. Had a surprise on the inside I wasn't expecting. The case was tore up pretty good and one of countershaft...
  10. H

    F23a1 destroker turbo. Start to Finish.

    Back under the knife. Prepping the new motor. File fitting the rings to my new specs. New engine build sheet: f23a1 87mm destroker. h22 crank eagle rods mahle pistons. compression comes out to 10:2-1. Perfect. :D Balance shaft delete kit ACT 10lb flywheel Ported...
  11. H

    F23a1 destroker turbo. Start to Finish.

    Mocking up the piping. 3" cold side piping and 2.5" hot side piping. Tial 50mm BOV. Making my oil feed line setup. Installing my tapped oil pan from my last turbo setup. Oil return line. Starting to finish everything up. FIC 650cc...
  12. H

    F23a1 destroker turbo. Start to Finish.

    Did this build on my car in just a couple weeks time. The car was already f23 turbo before the build. Put down 280hp/340ft lbs of tq before I spun a rod bearing on the stock motor. Then decided to build it. Figured since it was an f23 build you guys might enjoy it. This will cover the turbo...
  13. H

    Beat the heat Accord meet!! Austin, Tx 9-21-13

    Getting closer. Get your rides fixed up. :D
  14. H

    Clear Headlight Lenses / Headlights (No OEM Lines)

    Re: RL Caliper Mounting Brackets | ION Lenses/Headlights Or Clear Lenses/Headlights Might want to give these a shot. Brackets might work the same for your car. http://fatfourcustoms.com/newest_products/94-97_honda_accord
  15. H

    Beat the heat Accord meet!! Austin, Tx 9-21-13

    Updated info.
  16. H

    New member from Houston ,Tx

    Come out to the Austin meet. Have about 10 cars going from Houston so far. lol
  17. H

    Beat the heat Accord meet!! Austin, Tx 9-21-13

    Where: Meet up at Rudy's BBQ at 1 p.m for lunch. Addy: 7709 Ranch Road 620 North Austin, TX After everybody has met up and done eating we will roll out the Mansfield dam to take pics. Addy: 4370 Mansfield Dam Rd, Austin, TX When: September 21st at 1 p.m Who: Accords of all...
  18. H

    H22A4 & F23A1 weight difference

    Its about 75 to 100lbs heavier then the stock f23. Nothing to worry about.
  19. H

    f23a4/h23 non vtec head

    Also if you would have searched you would have found this. http://www.6thgenaccord.com/forums/showthread.php?t=45019
  20. H

    Oil pump failure? or High flow pump needed

    If you are loosing oil pressure there can only be 2 causes. Either your oil pump is on its way out or you are starting to get excessive rod/crank bearing clearance. Which could lead to a spun bearing. How many miles are on your motor?
  21. H

    Anyone running H22 with Nitrous?

    Brand name doesnt matter but there is a difference in the pieces that come in the kits. NOS and NX have the best pieces availalable. The solenoids and fogger nozzle that come in the zex kits are not ideal and will limit the size of shot you want. Most zex kits top out at 75hp for imports. The...
  22. H

    Gots to be a "G"

    It actually has less teeth. The factory h23a1 belt on this setup was way too loose. Found this belt to work perfect. Actually didn't have to fill any ports. Forgot to take a pic of the headgasket on the head before I installed it though. Built the motor and installed it over a weekend so was...
  23. H

    Gots to be a "G"

    Rest of the pics. The car is also his daily driver. F23a1 block K20 Pistons OEM Honda Parts Fresh Paint on the Transmission
  24. H

    Gots to be a "G"

    Everybody talks about them. Most people rarely build them. Built a motor for a customer. Installed it in his 1992 prelude. I also street tuned it until he gets a decent header and exhuast. Then we will hit the dyno. I'm estimating 170whp. The car runs and pulls great. Will spin the tires...
  25. H

    Projekt G23[Rebooted] | [Ended] Euro r H22A

    Re: Projekt G23 I don't see the point of building for high hp with high compression and limiting you knock limit with 91 octane.No 93 in cali. Yes you can do it but I like to get the most potential out of my motors. Either way the build is looking good. Keep up the hard work.

Latest posts

Random media

Original F20B motor
IMG 0825
20190327_104643
6703.jpg
5728.jpg
Back
Top