Search results

  1. M

    help me fix my brakes please, new MC and bled already.

    me again... did part 36 replace 6? doesn't list 6, and doesn't mention 36 superceding 6. http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=ACCORD&catcgry2=2001&catcgry3=2DR+EX+%28LEATHER%29&catcgry4=KA5MT&catcgry5=BRAKE+LINES+%28ABS%29 And can a prop...
  2. M

    help me fix my brakes please, new MC and bled already.

    had no helper so all I could do right now was remove lines from MC to ABS and bleed those with the one-man hose/bottle routine then bleed the 4 corners the same way... of course it didnt work but I do now 85% of the time hear a sound like pushing high pressure aerated liquid through a small hole...
  3. M

    help me fix my brakes please, new MC and bled already.

    oh and yes I also had bench bled the MC before putting it in the first time, just did it again to be absolutely sure I was setup for my plugs to either pass/fail and let me know where to go next.
  4. M

    help me fix my brakes please, new MC and bled already.

    ok, Ive bled the brakes a TON, nothing was solved. figured I possibly got a bad MC so I got another, bled them a TON, still have the problem. I used a couple peices of flat bar and vise grips and closed off the rubber line between the hard line and caliper at each wheel to eliminate any...
  5. M

    help me fix my brakes please, new MC and bled already.

    alright, thanks. got my brake booster sitting in the garage waiting to go in. then I'm going to go back to the bleeding debacle...
  6. M

    help me fix my brakes please, new MC and bled already.

    the fact that the booster is constantly sucking in atmosheric pressure has to mean either the diaphragm or 2 way valve inside have failed, no other explanation, right? so the booster obviously is bad...? but even with a bad booster the pedal should just be hard to press, but hold pressure...
  7. M

    help me fix my brakes please, new MC and bled already.

    ok, heres the story. we have an 01 accord I was using as my commuter for a couple years, no problems except pedal vibration under braking and eventually also started to cause the wheel to shimmy pretty bad under acceleration. finally decided to fix it and ordered up some parts. However I also...
  8. M

    H22 or F20b... Which is easier?

    Umm, sure there are... cam gears! lol, but I was referring to the complete swap with the t2T4 tranny
  9. M

    H22 or F20b... Which is easier?

    staying down low daily, sure the F20B wouldnt pull as hard, but a F20B equipped 6th gen would have to be quicker than stock when you are hammering the thing, right? seems like just from the gears alone it would be a nice upgrade???
  10. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    oh, I was really only going to use the P2A8 because I knew everything inside was good, and was just going to swap gearsets into it. having it appear stock was just something I thought would be kinda cool. I didnt go get it today, still have tomorrow available. and he says it didnt grind into...
  11. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    I dont know if you are talking to me, but I am pushing a whopping STOCK hp, lol. I got exhaust and modified stock airbox and that is it right now. CAI and a header will happen, but i figured closer gears would make a lot bigger improvement than just an intake or a header for a similar cost.
  12. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    hmmm, I dont think Im gonna do it anymore... I emailed him again for more details and now he lets me know it pops out of 4th and doesnt go into reverse. I didnt think it could be the problem but from reading I guess bad synchros can also cause pop-outs??? but about not even going into...
  13. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    well my tranny and this one Im looking at are both USDM, so thats at least a nod in my favor... if its still available wednesday I should go get it. not exactly sure when the swap will go down if I do get it, might still wait til I have the light fly and new clutch waiting to go in at the same...
  14. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    I hope he comes and yells at me too as long as somewhere in the yelling there is the info I need...
  15. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    once again I replied without seeing the last thing you wrote. thats the trans I was looking at from hmotors because the F20, that tranny and the PCB ECU costs 150 bucks less than an OBD1 LSD H22 swap, and 1450 bucks cheaper than a OBD2 LSD H22 swap... so what do you want for it anyways...?
  16. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    replied before I read yours eminodagreat, sounds good. I know piratemcfred couldnt get the M2S4's 5th in the M2F4 (found it in the archive, said it wouldnt work), but that the B4 5th fit into the F4. so hopefully the M2U4 (Im guessing thats the tranny you had) is also compatible with the...
  17. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    I just want closer gears REALLY BAD! lol I talked to a guy with an H22 mated to his stock F22 trans and with how fast it "didnt" seem (was quick but what he ran I think it should have been much better), I have a feeling that just this trans swap should be a pretty nice upgrade. I think I...
  18. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    ok, so I have found out that I will be trying for the accords 5th only, since 3rd and 4th have to be swapped as a set. and I have found that the 5th gear from a M2S4, will not go into a M2F4 without modification, and I found out that a M2B4 5th will go into a M2F4. I found that a P2(U or...
  19. M

    custom exhaust

    I have a I4-stock manifold-no cat-2.5 (I think, dont remember anymore)- 18" resonator (glasspack, again not sure on the length, Ill check that as well)- flowmaster 40. not really the same setup at all, but I have videos of it from in the car I think, and I know I have a couple fly by's I can...
  20. M

    My G23

    wait, I thought that was the whole point, throwing on the H22 head and having a DOHC VTEC engine? or do you just mean noone has built a G23 AND boosted it successfully? because a few posts down from yours someone asked about the G23 being non VTEC and nobody has corrected them yet...
  21. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    lol, if I wanted the trans to grind like hell. and EmMinODaGreaT, synchrotech-transmissions rebuild kit for the H22 transmissions says it works for the M2(U,Y,F,B, and A)4 trannys, but in that span there is 2 different first gears, 2 seconds, 3 thirds, 2 fourths, 3 fifths, and 2 final...
  22. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    well, I got a little ahead of myself there, I didnt want to wait for honda-tech to come back online to read all the threads I was finding on google. I now know that the gears themselves are compatible, but I am still curious if I can take the gears out of a trans that grinds and put them into a...
  23. M

    gears and final drive out of a M2F4 stuffed into a P2A8 case?

    alright, I found a M2F4 on CL for only 100 bucks, but the ad says it needs the synchros replaced. the trans in the car right now (01 ex coupe) is a P2A8 and it shifts nice and smooth with no grinding whatsoever. now I know that people pull gears/final drives out of different B series to get what...
  24. M

    new deck vs stock

    our 01 is one more rolling around with the stock HU, sub isnt "awesome" though...
  25. M

    *Pics update Need to decide what sub to go with

    well, theres just one more thing for the wife to ***** about then, probably not going to do it in her car. and so were you saying the IB3 is probably 30mm PTP, or one way?

Latest posts

Random media

QQ??20151024085535
Canyons pic
Night shot 1
product photo large image 547
Nose
Back
Top