rear camber kit DIY

hiddengamer7

Well-Known Member
Joined
Feb 8, 2007
Posts
4,611
Reaction score
9
Location
farmville
You guys do realize this thread is from 2006, and the OP sold his Accord and now owns a TL type S...
 

C_S_L

Well-Known Member
Joined
Aug 4, 2008
Posts
520
Reaction score
4
Location
NorCal 530/SoCal 951
OLD post, but a very good DIY.

Mods, could you STICKY this to the other DIY's master list. Had to search around for this. It will help others from posting "where can I get find a rear camber kit DIY?"
 

9450erick

Well-Known Member
Joined
Oct 12, 2009
Posts
1,000
Reaction score
6
Location
los angeles
If you want to be able to reuse the original part, I would not recommend using the fork type separator. More than likely it will rip/tear the ball joint boot. I suggest using the universal ball joint separator (2nd picture above). I could not find a store that had it so I ended up using these:

http://www.autozone.com/autozone/inourstores/lat/latLanding.jsp?bodyContent=steeringAndSuspension

part #OEM27020 Ball Joint Separator

http://www.autozone.com/autozone/inourstores/lat/latLanding.jsp?bodyContent=pullersSpecialized

part #OEM27022 Tie Rod End Puller


*** edit ***

This is what I would use next time: http://www.sears.com/shc/s/p_10153_12605_00996404000P

IMG_9167.jpg

Here is a install video reference from a email received from Wicked Tuning:

http://www.youtube.com/watch?v=dqeuvzJyCkU

( first 17sec is black screen )

this should be in the diy master list
 
Back
Top