18x10 with 25 offset on all 4 corners? possible?

[all motor eg6]

looking to pick up a set of the xxr wheels i can actually get them pretty cheap the specs are 18x10 with a 25 offset is this possible on all 4 corners?

 

[RedRyder]

Gonna have to roll and pull fenders, and run some crazy camber depending on how low you are. Even then I think these will still stick out.

 

[DrOwZee]

you gonna have to be slammed and run about -4 cambers with rolled and pulled fenders.

 

[saatchiphoto]

Im running 17x 9s im slammed on the ground, i just put on my camber kit and im still fine tuning the rear to not rub so hard, i ripped the left side of the rear bumper off and had to refit it too, if you want a crazy fitment like 18x10 which i thought about also the black xxr one;s bbs style there tight, but the fitment on an accord will be alot of work,i pulled my fenders and rolled them and im still rubbin hard on 17x9s my tires are a decent size, so definitly you have to go with a really stretch fitment and camber it bring it in, and most likely spacers and extended studs, my wheels are +35 offset... keychains running mb battles 18x 9.5s +15 stretched fitment super low, check out on stanceworks.com

 

[truWarier02]

I just don't think those specs are a good idea for the accord, even more so cause you have a sedan. You would probably have to lay frame and be running -4 or more camber to fit those AND flared fenders

 

[DrOwZee]

you can do it

 

[nyknick1015]

its been done before and is possible... this guy rolled all around but i dont think he pulled all around tho

 

[truWarier02]

Yeah, fcuk it, just do it haha.

 

[swollen_cu]

Im running 17x 9s im slammed on the ground, i just put on my camber kit and im still fine tuning the rear to not rub so hard, i ripped the left side of the rear bumper off and had to refit it too, if you want a crazy fitment like 18x10 which i thought about also the black xxr one;s bbs style there tight, but the fitment on an accord will be alot of work,i pulled my fenders and rolled them and im still rubbin hard on 17x9s my tires are a decent size, so definitly you have to go with a really stretch fitment and camber it bring it in, and most likely spacers and extended studs, my wheels are +35 offset... keychains running mb battles 18x 9.5s +15 stretched fitment super low, check out on stanceworks.com

Why does everyone say that keith's wheels are 18x9.5 +15????

They are 18x9.5 +25... Lol

And I had a 17x9 +29and had no issues rubbing at all. Shaved my bumper and bumper tab and rolled and pulled my fenders.

17x9 +35 isn't that aggressive IMO.

 

[DrOwZee]

^^lol theyre +23 buddy