2012 accord seats

[v6indodarknight]

Well the thing is...the front seats dont have airbags. Lol

Tony Nguyen or something like that? His accord is dope af.

no airbags? as in its been deployed? LOL...

yup, that tony, anytime he is in atl, we go out to eat in iron age (korean bbq)

he comes down here at least once a month... LOL

here are us, a long time ago, he was rocking the xxr

then here is the 1st atl accords meet rocking varss, and the grey sedan with xxr is monty aka 1nonlyaccord

and this last one, was on the 2nd atl accords meet... rocking ronjon lip and varss

 

[potholesloveme]

Cleanest 8th accords ive seen. The part car was totaled and they deployed. But i dont think i have airbags in the side anyways.

 

[v6indodarknight]

Cleanest 8th accords ive seen. The part car was totaled and they deployed. But i dont think i have airbags in the side anyways.

i c... its the bolt part thats slightly different, i think for most car would be different,

I tried installing my friends rsx-s seats on my car... and the rail is soooooooo different,

like the ways the angle of the frame and the wholes are way off...

good luck though, but i would choose tsx seats over the 8thgen accord seat... they are not that great...

trust me, i have the coupe and my brother have the sedan... and both not that great... LOL

 

[potholesloveme]

The tsx seats do look good. Maybe saving up for them wouldn't be a bad idea.

 

[iviaillet]

If the seats do not have side airbags then you would not be able to swap into a 6th gen with side airbags, unless you dont have to worry about inspection, the heated seats are simple to wire up as long as they dont require a body control module. Theres a good chance the seats couldnt almost bolt right up, and all you should have to do for wiring the power seats is power two wires to make the 8 way adjustments work, your going to have to look at a 8th gen wiring diagram to figure out which wires you need to run power to and how much amperage the circuit should roughly have.