AllGOnoSHOW's SCCA 02 Accord Coupe V6 6M/T

[AllGOnoSHOW]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

Update sort of.....

The old spacer setup of 5mm in front and 10mm in rear will now be replaced with 20mm in rear and 10mm up fron which will make my setup ...

17x8 +35 in front
17x8 +25 in rear.

That's all folks​

 

[99cfENVYv6]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

edit: reading owns me.

What tires are you going to use?

 

[RedRyder]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

Have fun changing all those studs, Matt.

 

[AllGOnoSHOW]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

I'm running 225/45s which are very slightly stretched due to factory size for TL wheels being 235's.

 

[AllGOnoSHOW]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

Have fun changing all those studs, Matt.

I've already done it before. It's not that bad at all.

 

[RedRyder]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

You should make a DIY on it, I dread trying to pound mine out for some reason.

 

[AllGOnoSHOW]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

Yeah but remember you have to take into consideration the harsh winters and snow/ salt that I'm sure plays a factor into why It's so hard. A couple bangs and mine pop right out.


I could make a DIY though I don't mind

 

[RedRyder]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

That would be cool, I just hear stories of people damaging the hub, stripping threads, etc. I'd like to see how you do it.

 

[AllGOnoSHOW]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

That would be cool, I just hear stories of people damaging the hub, stripping threads, etc. I'd like to see how you do it.

Yeah. The only time I've messed up a hub is drilling out one stud hole to fit a Subaru stud which has a bigger knurl lol don't ask I didn't know what I was doing at the time ha. But other than that It's easy as pie. Wheel off-caliper bracket bolts (2)- pull pads-remove rotor(may have to drill out rotor screws and replace) knock out the studs w/ medal hammer. Knock back in and pit everything back. Easy

 

[RedRyder]

Re: AllGOnoSHOW's 02 Accord Coupe V6 6M/T

Do you have to remove the dust shield or whatever so the studs can fall out the back of the hub?