AllGOnoSHOW's SCCA 02 Accord Coupe V6 6M/T

[swollen_cu]

Have you checked the starter relay?

 

[AllGOnoSHOW]

Have you checked the starter relay?

Nah, I've not gotten a chance to check anything yet. I need to get a hold of a voltage meter.

Thanks for the tip!

 

[89ef2]

I had to replace my ignition relay cause it would want to start when it wanted too... After I replaced it never had a problem since... Cars looking good

 

[AllGOnoSHOW]

Thanks for the input 89.

Update as follows is there was a slight delay on the money paperwork but it has been mailed, I'll received it, sign it, and then mail it off to be notarized.

I've been in contact with etrscca and they are very welcoming and helpful just like 6ga so it's nice. I'm working close with them to get my car ready for SCCA. Thank God there's people that know what they are doing and don't freak out like I do ha.

Great updates to come.

Still need to build custom bracket for passenger controls

 

[AllGOnoSHOW]

Good news. Seat may not need to be FIA approved which opens up a lot more options!

Now I've started looking into NRG seats. Andyautosport is running free shipping now

 

[AllGOnoSHOW]

Ok I've been researching a ton and I've heard a lot of good things about NRG from people who AutoX so I will most likely be going with them for my steering wheel and hub

Steering wheel


Then mating that with whatever hub I need. Seem to be priced around 100 bucks. I'm trying to pick out the right Hub that I need. It's annoying. Pretty positive I can use a Sparco hub because NRG,Sparco, and MOMO all share 6 bolt mounts.

And wondering if anyone's ever ran NRG coil overs http://new.getnrg.com/products/dme-suspension/coil-over-kits/honda/dme-hd02ss

Seem like re badged FF's.










Ok I'm an idiot :roll:

Sparco, MOMO, and NRG all share the same 6 bolt mounting so I can just buy a Sparco hub adapter for 70 bucks and use it with my NRG steering wheel. Problem solved.
I'm going with these
Steering Wheel
Sparco Hub

Now time to finalize the seat choice.

Is anyone my size on here? I'm 6'5'' 250 lbs. I am guessing I should buy the "large" version of the seat.

I'm 99% sure I'm going with this NRG seat
NRG Seat
Bracket
Found the harness bar I need just need to finalize the harness situation.
Harness
Harness Bar
Steering wheel

 

[CG2]

You gotta sit in the seat before you buy it, you don't want to spend $400-$600 on something you don't know if you'll be comfortable sitting in. See what everyone else is running in autox, and ask if you can get a ride/sit inside.

 

[AllGOnoSHOW]

Thanks for the tip

 

[AllGOnoSHOW]

Started removing the stickers.

Got the paperwork for the money and also got another check for 400 bucks after I paid off 1600 dollars of debt (thank you IRS)

So I have around about 1600 bucks to spend

and now my starter ****ed up even more so I gotta get a new one - one of the end bolts broke off ****ing lame. I can't even start it from the engine anymore

 

[Valet]

Hopefully a new starter won't cost $1600 haha