scrappys64
Well-Known Member
Okay guys I am trying to install the rear ingalls camber kit and I can't get teh secaon arm off.. The bolt won't come loose.. Who on here has done this already??? Yes I did search..
CAMBER kit
- Thread starter scrappys64
- Start date
cantafordaccord
Well-Known Member
- Joined
- Oct 17, 2006
- Posts
- 982
- Reaction score
- 4
never got around to doing it but you should need a balljoint puller I belive also if you really want to possibly waste the stock peice you can pound it out
scrappys64
Well-Known Member
Man I have tried pounding it out and that B I T C H is not going anywere. I have heated it up and melted the damn gasket inside to the bar. So when it moves it makes this annoying sound. I am getting two new bolts from the dealer so I think I am going to cut them off. 
xi0utlawstarix
Well-Known Member
its shouldnt be that hard, should be easy as picking your nose.
scrappys64
Well-Known Member
Yeah the front rear is but the back on acts like it's welded in or some S H I T
6
6THGEN_AI4
Guest
scrappys64
Well-Known Member
Hey thanks but I did look at this already but it is different than my set up.. I am guessing the suspension set up is different on the LX. I have rear drums and it looks different... I don't have a pic to show but I will see if I can snap some tonight. 
6
6THGEN_AI4
Guest
I also have an LX and is the same thing...
scrappys64
Well-Known Member
I have the Ingalls Camber kit. Two rods need to be switched out on each side.
accordman1
Well-Known Member
I just got my rear Ingalls camber kit on today by a shop that I work at. It got an alignment after but it didnt seem to take him long at all to do.
