sayhi2damonsta
New Member
I was wondering if it is possible to swap the rims out. If so is there any thing i would need like spacers?
Can 2008 Honda Civic 5 lugs rim fit on my 98 Honda Accord Coupe EX V6
- Thread starter sayhi2damonsta
- Start date
puzzlemaster94
6GA Connoisseur
It'll bolt right up. Might get a little 5mm spacer or shave your front caliper brackets just a bit to clear them. But they have been done before
Mikey
Well-Known Member
Yes and yes. Rears don't need spacers but fronts will require spacers or grinding down the caliper bracket. I chose to grind down the bracket due to the fact that I'm not a fan of spacers and extended studs and taking chances with your lugs coming off.
sayhi2damonsta
New Member
Thank you guys if I do it ill post a pic.
RedRyder
Save the manuals
^Awesome photos. And road.
You can use 5mm spacers on stock studs (I did it for a few years), any thicker though and you'll want to go with extended studs or spacers like Ichiba V2's that have them built in.
You can use 5mm spacers on stock studs (I did it for a few years), any thicker though and you'll want to go with extended studs or spacers like Ichiba V2's that have them built in.
Mikey
Well-Known Member
These are/were the USDM civic si wheels...
Ok, I think we had almost the same on our 2009 civics.
sayhi2damonsta
New Member
I didnt need spacers after all no grinding on the calipers. They are alot better than my stock rims they were curbed and scraped. Here's my car.
