Clutch Sticks To Floor!

[JoeyG401]

So randomly my clutch started to catch really low to the floor out of no where. I put in a new slave cylinder less than a year ago and no clutch fluid was leaking. My mechanic raised the clutch plate so it would catch higher as a temporary fix.....which worked for 3 days. Now everytime i shift my clutch stays on the floor and when i start my car, with the clutch engaged, it moves as if the clutch is only halfway pushed in....lemme know what you guys think. I may need a new clutch as im approaching 100k but i was expecting it to start catching really high, not low....

 

[2002CG3coupe]

Answer to your problems here
http://www.6thgenaccord.com/forums/showthread.php?t=28223&highlight=clutch+master+cylinder

 

[jdmcg3]

^the wonders of a simple search

 

[accordracing91]

Air in the system. Bleed it.

 

[JDMpower25]

its not the clutch. you will know for sure when ur clutch will start slipping.
it sounds like ur clutch master or slave cylinder. u can try bleeding the system, but i dont think it will help.

 

[bdeitemeyer]

There was a recall to replace the slave cylinder years & years ago. Research the Honda TSBs and get it replaced for free. I did about 7 years ago when I worked at Honda.

 

[JoeyG401]

I already replaced the slave cylinder last year so its not that, and the system was bleed last week so its not that but thanks everybody

 

[JoeyG401]

turns out it was the slave cylinder again -_- ill never trust an aftermarket $70 one again..