DBO867's 1998 Accord LX 5spd

[DBO867]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

I will be making another visit to the junkyard again next week if anyone is interested in some items

 

[RedRyder]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

Nice junkyard haul. Are those sideskirts stock sedan?

 

[DBO867]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

Yea, I picked up the 01-02 sedan skirts since it has the flares on em

 

[DBO867]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

Currently at a lost. I picked up my front end off a v6 coupe and there seem to either be extra plugs on the hood latches/horn area or the plugs on my harness got ripped off from the accident. The bigger problem is, i cant find where the wires mightve ripped from. Is there a difference in plugs for the 4cyl and v6 around that part? Also, any recommendations on how to remove the driverside motor mount bracket, mine wont budge at all

 

[Sino]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

Not sure if you mean bumper but if you do, to swap a 2dr bumper onto a sedan you also need to swap in a radiator support.

Sent from my Nexus 6 using Tapatalk

 

[DBO867]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

Not exactly what i meant haha. I crashed my car couple months back and picked up a whole new front end off a 2000 coupe v6 including the radiator support. The horn assembly was included with the radiator support since i needed to replace mines anyways. But on the v6 models, there seem to be 2 extra plugs that i cant find on my 4cyl harness. I was wondering if there were any difference between the 4cyl and v6 horn assembly? And would any light pop up on my dash if i were to leave those clips unplugged?

 

[Sino]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

Looks like there's a temp sensor for the v6's auto climate control mounted in the front. When I get out of work I'll compare wiring diagrams and see what else may be there.

Sent from my Nexus 6 using Tapatalk

 

[DBO867]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

Looks like there's a temp sensor for the v6's auto climate control mounted in the front. When I get out of work I'll compare wiring diagrams and see what else may be there.

Sent from my Nexus 6 using Tapatalk

cool thanks, ill just keep searching around for now

 

[RedRyder]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

I would suggest upgrading to the 8thgen horns. Cheap, easy, and you can actually hear them on the freeway haha.

 

[Sino]

Re: DBO867's 1998 ACCORD LX 5MT TMT (Taking My Time) Build!!!!

No luck on my end. Only other thing I can think of in the area is hood pin switch for factory alarm on EXs.

Sent from my Nexus 6 using Tapatalk