DIY painting interior

[BullAccord]

I have the door panels broken down into their respective halves, and have already removed all the vinyl from them. I'm currently sanding off the foam backing and working on filling in the tiny holes in the panels from the factory. Once I've gotten them to my liking, I will be prepping, priming, painting, and clearing them for the glossy surface. My goal is to look similar to that of Ghost Ryder's console top, that pretty gloss black he has accomplished.

Any pictures of the process?

 

[danmccormick87]

Any pictures of the process?

Still needs more sanding, pressure washing, and degreasing before I start the bondo/primer process. I didn't take pictures from before, but after you pull the vinyl off, the foam underneath is an entirely new layer that has to be scraped.