ANDRAOMARK
Active Member
I have a f20b that I dropped in my 01 accord but the plug that connects to the distributor is different then the on on my wiring harness dose anyone knows what I'm gonna have to do or can I use my distributor from my f23a1
F20b distributor question
- Thread starter ANDRAOMARK
- Start date
dv8801
Well-Known Member
any update on this?
2002CG3coupe
Well-Known Member
I think you have to depin both the dizzy and crank sensor tabs (extend the wires for crank sensor) and if needed cut and solder to connecting tab make sure the colors of the wires match to the same color on the tab......
When I did it for my h22a4 sh!t confuse me at first till I found h-t thread on it. I didnt have to extend the crank sensor but the wiring was thicker on the dizzy and it looked kinda jenky but it worked/started lol
Hope this helps
When I did it for my h22a4 sh!t confuse me at first till I found h-t thread on it. I didnt have to extend the crank sensor but the wiring was thicker on the dizzy and it looked kinda jenky but it worked/started lol
Hope this helps
