F20b td94u distributor - need help with wiring

[RedRyder]

Enjoy your vacation.

 

[Silver99]

.

 

[Silver99]

Redryder shut the **** up

Sent from my Z970 using Tapatalk

I cannot belive this. RedRyder is such a nice person.

 

[cg3low4life]

Enjoy your vacation.

I'm back I'm sorry by what I told you it's just that I been having alot of truble with the swap

Sent from my Z970 using Tapatalk

 

[cg3low4life]

I wish I had not helped you. There is no need for such childish behavior. Welcome to the forum and good-bye, because more than likely you will be banned.

I'm back cuz

Sent from my Z970 using Tapatalk

 

[bairdandrew77]

We're here to help you and things are a lot more confusing and unorganized when a member makes multiple thread on the same topic. Also, please show more respect towards the other members. Disrespecting one person on here can make many others lose respect for you.

Anyways, these pictures should help you. I'm not sure which plug your distributor looks like, but since you said it has 8 wires I'll assume it's the OBD2B. The picture says Civic but just use it for your car anyways.

It's been a while since I've worked on an Accord, but it seems like the F23a1's disi just has the CYP wires on it. The other 2 is ignition. So it looks like you need the crank sensor and TDC wires routed to the 8 pin plug. You'll need to find a wiring diagram that tells you the colors of each wire so you don't get mixed up, a Haynes or Chilton book from a parts store will help here. I'd recommend Chilton because it has info on both the Accord and Prelude, If I remember correctly. Hope this helps you get your car on the road.

 

[cg3low4life]

Yeah thanks for the help

Sent from my Z970 using Tapatalk