b18lsturbo
Active Member
doing the h22 swap and u want to use the the iab or the butterflys then ur going to have to wire it in the the harness.now back to the h22 harness cut off the iab plug from the harness.always cut long to shorten later if needed. u will notice that it has 2 wires one is black/yellow wire and the other one is pink
1.connect the black/yellow wire to the H22's plug to the same color wire that goes to the distributor in the Accord's harness.its just a jumper.for power.
2.connect the pink wire to the ecu cause thats the signal wire from the ecu.
And thats it.good luck
1.connect the black/yellow wire to the H22's plug to the same color wire that goes to the distributor in the Accord's harness.its just a jumper.for power.
2.connect the pink wire to the ecu cause thats the signal wire from the ecu.
And thats it.good luck
