Header to Downpipe Exhaust nut

[JDM_Rook]

So I am missing one of the three exhuast nuts used at the header to downpipe flange. It has a 14 mm head and it looks like this one:

http://www.bestmufflers.com/bshop/p...=2835&osCsid=471073cc5a552d55b3ade40b28074b59

This website is in Austalia and I need this ASAP. Does anyone know where I can find a nut like this? Would it be a dumb idea to go to a local exhuast shop and ask? Here is an ebay auction of a similar nut but don't need 25 of them, not sure of the thread pitch either but assume this is the same one.

Any help would be appreciated.

 

[JDM_Rook]

oops...here is the ebay site

http://cgi.ebay.com/ebaymotors/25-H...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[finch13]

You really don't need a special locking nut on exhaust... just go out an get yourself a 10x1.25 flange nut, or regular hex nut with a washer, throw in a 10mm lock washer if you really must.

 

[JDM_Rook]

^Repped. I thought maybe heat would be an issue, but I am sure i will be fine will a reg hex nut. Always a help Finch. Thanks again.

 

[9450erick]

go to your local auto zone and go to the bolts and nut section
look for M10-1.25 nut and they usually sell 4 nuts. locking ones two(swirlys on the nut so it wont come undone) with a reg hex nut it might come undone
u can get the bolt and 4 nut for like 5 bucks
i know cause i stripped 1 of the bolts and i had a exhaust leak 4 a while
just went to autozone and easy fix

 

[JDM_Rook]

^^You were right. I have never checked out the nuts and bolts section at Autozone, but they had exactly what i was looking for.

 

[9450erick]

yeah i searched 4 like a month looking in home depot and stuff like that and could never find it. one day walked in to buy like motor oil came arcoss bolts and nuts section and exactly found it
a lil rep don hurt lol