Help: Replacing aftermarket deck with stock deck.

[kenttt]

Quick question:

I currently have a Sony CDX-GT630UI in my Accord. However, I'm planning on replacing it with my stock deck. I know when it was installed, they also put in an aftermarket wiring harness. Will this still be compatible with my stock deck?

 

[nexTOme]

yes.
just cut it and re-wire.

 

[kenttt]

yes.
just cut it and re-wire.

Sorry for being a noob at this specific topic.
But I read somewhere that there is a plug that you can simply just stick back into your stock deck. Is it possible to leave and use the wiring harness that I did for my aftermarket deck?

 

[nexTOme]

some thing like this right?
http://www.bestbuy.com/site/Scosche...=1218016142354&skuId=9074182&st=honda harness

yeah you would plug that into stock plug, then you will re-wire those open-end wires with those coming out from the stereo.

 

[kenttt]

some thing like this right?
http://www.bestbuy.com/site/Scosche...=1218016142354&skuId=9074182&st=honda harness

yeah you would plug that into stock plug, then you will re-wire those open-end wires with those coming out from the stereo.

Oh alright, I understand what you're saying now. Thanks for the help!

 

[nexTOme]

Oh alright, I understand what you're saying now. Thanks for the help!

sorry if i wasn't being clear enough lol
trying to study for exam tomorrow and being on the forum doesn't work well i guess.

GL

 

[ryan s]

some thing like this right?
http://www.bestbuy.com/site/Scosche...=1218016142354&skuId=9074182&st=honda harness

yeah you would plug that into stock plug, then you will re-wire those open-end wires with those coming out from the stereo.

jae, he's going back to stock.

in that case, just pull out the aftermarket unit and unplug that^ harness from the stock harness.

then plug the stock harness back into the stock unit.

you only have to do something special if the people who installed the aftermarket unit cut off the stock plug...but lets hope not

 

[nexTOme]

Quick question:

I currently have a Sony CDX-GT630UI in my Accord. However, I'm planning on replacing it with my stock deck. I know when it was installed, they also put in an aftermarket wiring harness. Will this still be compatible with my stock deck?

jae, he's going back to stock.

in that case, just pull out the aftermarket unit and unplug that^ harness from the stock harness.

then plug the stock harness back into the stock unit.

you only have to do something special if the people who installed the aftermarket unit cut off the stock plug...but lets hope not

i fail at reading.
yeah, what ryan said.

 

[NashvegasCG]

if they did it correctly it should just be plug-n-play in the reverse order.