Help with Function Form Coilovers!

[Yardley]

Just picked up a used set of used Function Form Type 1 Coilovers but they didn't come with the wrench. Where can I get the wrench to set the height? Also just want to make sure the instructions on the attached picture are universal? Biggest thing I've done on my car has probably been replacing the front bumper so I don't want to f*ck anything up! Thanks!

 

[Dinzdale40]

that should be correct for the function forms...

also you can get coilover wrenches pretty cheap online...
http://www.google.com/products?q=coilover+wrenches

 

[knighthawk1104]

so.....what if you made the springs tighter? what would that do?

 

[Yardley]

that should be correct for the function forms...

also you can get coilover wrenches pretty cheap online...
http://www.google.com/products?q=coilover+wrenches

Thanks man. One more thing. I was reading these instructions: http://syclone.motocrew.com/CG5/suspension.htm

In step 8 it says "**If you're switching to coilovers, you will only be reusing the top mount unless yours includes one." Do you know if I have to re-use that part with the Function Forms? Thanks again.

 

[XxESKIMOxX]

well f2s should have already come with top hats. i think you can just order a new wrench from the f2 guys it shouldnt be that much anyways. yes just adjust the bottom part. the stuff that doesnt touch the springs. dont touch anything related to the springs.

 

[knighthawk1104]

i adjusted my springs =P