I think I found my oil leak.

[JMillerUA6]

Search in the DIY section, I'm sure there is something there.

 

[JMillerUA6]

**** it, I'm feeling generous today....... http://www.filtsai.com/accord/valve_cover_gasket/index.php

 

[newjacksm]

Thanks Much appreciated, hopefully I didn't damage my engine since it's been like this for a while. Today after driving it and realizing I should check my oil since its been quite some time and put about 1500 miles since I dropped a quart into it I took off the cap and there was steam coming out of the head when I took the oil cap off. :-\

The transmission on my car is also feeling a bit iffy too, but it always has and yet has to give me a problem. I changed the tranny fluid on it about 8000 miles ago all highway.

 

[ryan s]

thanks, I know I dont have the right tools to do this but all I would need is im guessing a torqe wrench?

10mm socket (x2...one in both drive sizes below)
3/8" ratchet
1/4" ratchet (for re-installing the VC bolts)
3/8" universal joint
pliers
maybe a flat head screwdriver

thats about it, really...

 

[HondaLuver83]

man that east coast salt really ravages your car =(

 

[newjacksm]

yeah it really does, it isn't garaged kept. I've been to Arizona and it's great seeing all these old cars still on the road with the original paint job still looking near brand new!

Can't wait to getttt outta here!

 

[Hondastylez]

Would this be similar for the V6 ?....ahhh what am i doing...time to look at the Haynes Manual...

 

[JMillerUA6]

I haven't pulled the VC's off my car yet, but I'm sure there is nothing to it.

 

[EatSleepAccord]

yea what they said just the gaket it like 25 bucks at autozone.

 

[iDriftYou]

how many miles do you have on her?