Ilovemy6thgen's 98 sedan project

[Ilovemy6thgen]

So I picked up another 98 sedan not too long ago. This will be my next project. It's an 98 Sedan ex, 5 speed with 200k miles. Not in the best condition but I couldn't pass up a deal.
Updated 4/1/13
Newest in red

Engine / Performance:
-F23a bottom bored to 86.5mm
-K568M865 forged pistons for K20
-F23a Forged Rods
-Upgraded valves and valve seals
-ACL Race bearings (Main and rods)
-Kaizenspeed Balance Shaft Delete Kit
-Walbro 255 (Need to install)
-Blox Racing Magnetic Tranny and Oil Drain Bolt.
-Unknown headers (ebay?)

Suspension/Wheels:
-V6 5 lug swap
-Prothane Front Strut Rod Bushings
-Megan SS coilovers (12k fronts, 8k rears)
-Wicked Rear Camber Kit
-TL RSB
-18" VS-XX 18x9 (215/40/18) 18x9.5 (215/40/18)
-Moog bushings/endlinks all around
-Acura legend 2 piston calipers

Interior:
-JTC SS with a mugen knob
-LED Interior/Cluster Conversion
-AP1 Steering wheel
-Bucket Seats
-Pioneer front speakers (TS-G1644R)
-Pioneer AVH-X1500 In-Dash
-New bright white leds

Exterior/Cosmetic:
-98-00 Coupe front bumper with the Bayson Lip
-Morimoto Mini H1s
-e46r shrouds
-Red/Clear
tails
Future Mods In order. Things in blue are done:
-Tires for my wheels
-Moog endlinks
-Body work and a full Re spray (In the process, along with a slight shaved bay)
-New double din
-Full custom 3" exhaust
-Turbo the f23a

When I got the car.

 

[20-CG5-01]

Gl on the project, what color are you planning to paint it?

Is it going to be a straight line beast or a cornering monster?

 

[Ilovemy6thgen]

Probably factory black. I want this to be a good/turbo weekend car. After this project I want to build a 240 with either a 2jz or rb but we'll see.

 

[AllGOnoSHOW]

Good luck with your project

 

[FIGHT4MYACCORD]

Have fun bringing her back to life and how much did you pay for her?

 

[fastflyinaccord]

No spark plug wire huh




lol



Have fun with the new project!

 

[Ilovemy6thgen]

Got her for $1400. Clean title and all.

As for the spark plug wires, there's was misfire so I took the old ones off and installed new ones along with new spark plugs. I'm going to swap the built motor in it once I get it all completed and put together.

 

[Elite1JDM]

Good luck with the sedan!

 

[20-CG5-01]

$1,400 isn't that bad for a clean title project. Oh and I forgot to ask, how much power are you planning to make?

 

[Ilovemy6thgen]

Thanks guise!

I want to make around 300-350whp with the h23 head. It won't be done anytime soon, I want to take it slow and do it right with quality parts.