ok so i ran into a pretty big problem this evening.
so i received my my LED today to make the right side of my speedo brighter but.... now i ran into an even bigger problem. when the bulb was replaced and the three wire connectors were all plugged back into the cluster i turned the cluster lights on and they did not light up. if i push the cluster or hit the top of the dash they light up for a split second then go back off. now i noticed that out of the three wires that are connected to the top of the cluster if i wiggle the one on the left side they light up. is it a connection problem? because it worked like 5 days ago fine???